|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
09-22-2019, 08:57 PM
|
||||
|
||||
Looking for a Starter/Gen Pulley
I'm looking for a Starter/Gen Pulley for my 127. Many other models will fit also. email me at mby852@yahoo.com
https://www.onlycubcadets.net/forum/...attach/jpg.gif
__________________
  CC Model: 127 w/42" deckCC/MTD Model: 2155 w/42" deck  .....DAD bought em new.....
|
|
#2
09-22-2019, 09:09 PM
|
||||
|
||||
|
Cheapest one I saw on ebay. You might ask the seller for some ID measurements before purchase.
I would also suggest looking through the links at top of page. https://www.ebay.com/itm/Cub-Cadet-S...AAAOSw70Rc7IfI
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641
|
|
#3
09-22-2019, 09:36 PM
|
||||
|
||||
|
I saw that one on eBay. I didn't like what I saw on that one. It looks like a crack on the end of the keyway slot. And from the backside the keyslot looks wider at the top unless it's the camera angle. I missed a good one a week ago on there and it went for a good price. I checked the sponsors. Theres a couple. I may have to go with one of them unless something else shows up.
__________________
CC Model: 127 w/42" deckCC/MTD Model: 2155 w/42" deck .....DAD bought em new.....
|
|
#4
09-23-2019, 06:36 AM
|
||||
|
||||
|
Well, I dont know if cubs are plentiful where you live but I have purchased whole tractors for the price of that pto basket on Ebay before
 maybe time to look at craigslist
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641
|
|
#5
09-23-2019, 07:05 AM
|
||||
|
||||
|
I check there all the time. Once in a while a decent deal shows up but not that many here. There's an Original for $200 about 3 hrs from here that doesn't run that's been on craigslist for a few months. Everything else is priced beyond belief. Something will turn up sooner or later. The good thing is I don't really need the tractor for any yard work or anything right now.
__________________
CC Model: 127 w/42" deckCC/MTD Model: 2155 w/42" deck .....DAD bought em new.....
|
|
#6
09-23-2019, 07:21 AM
|
|||
|
|||
|
Did you try our sponsors: Patton, Houtz, or Cub Classics ....???
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#7
09-23-2019, 07:26 AM
|
||||
|
||||
|
If you can’t find a decent one, Cub Cadet Specialties has a brand new old stock for sale. Not cheap though.
https://www.ccspecialties.org/pulleys.html
__________________
1964 Cub Cadet 70 (Full Restoration), Upgraded/Rebuilt K181 8hp engine, custom exhaust stack/flapper, NEW clutch, brand NEW steering column, Custom made wiring harness w/ammeter, LED headlights and tail light, Custom 2” receiver hitch, Custom pull behind paint matched trailer
|
|
#8
09-23-2019, 07:49 AM
|
||||
|
||||
|
One other suggestion. The keyed hub bore is just tack welded in place I believe. I think I have seen weld in bores that are pre keyed in Mcmaster carr catalog. With some care and patience I bet I could cut an old one out and weld a new one in with enough precision that it would work well. This could very well be the most cost effective way to go.
I would carefully cut the old one out. Then I would chuck the new piece in my lathe. I would use a run out gauge while mounting the pulley to get it to run true and weld it in. This could be done without a lathe but you would definitely need access to a welder. Mig welder would be my choice. Here is a link to a company that has a bunch of weld in style keyed hubs. https://redboarchain.com/products/1-...hoCA-EQAvD_BwE
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641
|
|
#9
09-23-2019, 07:58 AM
|
||||
|
||||
|
Here are your part numbers:
Original Part # IH-385290-R1 Superseded to Part #: 231591-S
__________________
1964 Cub Cadet 70 (Full Restoration), Upgraded/Rebuilt K181 8hp engine, custom exhaust stack/flapper, NEW clutch, brand NEW steering column, Custom made wiring harness w/ammeter, LED headlights and tail light, Custom 2” receiver hitch, Custom pull behind paint matched trailer
|
|
#10
09-23-2019, 08:00 AM
|
||||
|
||||
|
A little bit cheaper:
https://www.ihccw.com/manualpto.html?product_id=2444
__________________
1964 Cub Cadet 70 (Full Restoration), Upgraded/Rebuilt K181 8hp engine, custom exhaust stack/flapper, NEW clutch, brand NEW steering column, Custom made wiring harness w/ammeter, LED headlights and tail light, Custom 2” receiver hitch, Custom pull behind paint matched trailer
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
