|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
04-23-2020, 10:25 PM
|
||||
|
||||
PTO Removal
So I'm looking for some advice. I'm trying to remove the pto clutch on the front of one of my K241. So the PO somehow put the pto clutch on so that the set screws were not lined up with the cut outs on the clutch basket if that makes sense? So I was able to get 1 of 3 set screws out. The other 2 as far as I can see are completely stripped out. So in anyone elses expirence do I drill out the other 2 or just cut my losses and bust out the cutting wheel to get it off the crank shaft. I have a mower deck I wanted to use for this but will be my daughters ridding/working tractor so it's not absolutely necessary to have the clutch. I will be a pearl black with pink accents so the deck may look funny on it anyways.
|
|
#2
04-24-2020, 07:24 AM
|
||||
|
||||
|
To line up the cut outs on the basket with the screws you can simply tap the button in the center of the pto with a hammer. While tapping, at the same time try to rotate the clutch basket by hand. The tapping causes an instant of the clutch releasing and you can move the basket a little at a time. Obviously the belt should be removed.
On getting the screws out, there are probably a half million threads here about that. You can do some searching and reading.
|
|
#3
04-24-2020, 08:19 AM
|
||||
|
||||
|
Quote:
 maybe not half a million.... But there sure are a heck of a lot on PTO set screws! 
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
