![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
Here is my question. I am going to attempt to make a power angle blade and use it on my 169 and 149... 1. Where can I find a cylinder that will work?(i have seen some complete kits but i can make the 2 pins that are needed). Also, where and how would it connect to my hydraulics. What parts would I need to make this work?
Thanks everyone. |
|
#2
|
||||
|
||||
|
I have found a couple at NORTHERN HYDRAULICS that will work fine for around $50. I am making mine to mount parallel to the tractor. I think that when the blade "trips" over something, it will not be as easy to damage the cylinder if mounted this way.
I am not familiar with the tractors you have , so someone else will have to chime in on the plumbing.
__________________
Sold everything but one. 1211-snow pusher, cab ,54 inch plow, loaded tires (all 4) Gilson wheel weights, X-trac fronts- soon to have power steering and dual hydraulics |
|
#3
|
||||
|
||||
|
thanka alot. just went on there website and ordered one looks like it would be perfect...
|
|
#4
|
|||
|
|||
|
IH Cub Cadet had a dual spool/hydraulic system for the Quiet Line series that fits the Wide Frame Cub Cadet. The system had a dual spool and lever system. That set up isn't easy to find and will cost big dollars to buy. Someone in a different site used 2 single spools for his dual system. Cub Cadet had 2 different mounting set ups for the spools over the run of Wide Frames and Quiet Lines.
There was lines that went to the front of a Cub Cadet to run the angle part of the blade. |
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.