Cub Cadet Grizzly; Parts??

[MattN124]

Hello;

I picked up my first Cub Cadet product last week. It's an older SxS/UTV called a Grizzly 4016. From what I have learned these were made around 1996-97.

It's a really neat little machine! Not near as much performance of a newer model, but this is exactly what I need for chores around my property.

I need help finding brake parts. The person before me thew all the front brake parts in the trash

I've already tried Cub Cadet dealers around me and everything on-line I could find. All of these parts are not available. I've also not been able to find any kind of cross-reference for the part numbers.


Does anyone have any knowledge of these machines?

If I can't find parts, I'm thinking about trying to make something by using go-kart parts or something similar. I don't have any experience with this type of FAB work, but I'm not scared to learn.

I've attached some pictures, including from where the front brakes should be,

[MattN124]

Here are some diagrams of the brakes and front end, with part numbers.

All of the part numbers show up as not available everywhere i look.

Anyone know of a cross reference for this? Or anyone have a suggestion for potentially using parts from a different vehicle that I could FAB something to make them work?

Front axle and steering:
https://www.messicks.com/cc/92641?se...agramId=497924

Brake System:
https://www.messicks.com/cc/92641?se...agramId=497928

[MattN124]

Added another picture; of the ID tag for this machine

[bill682]

They must have been junk from the start. I can't find much for them.
If you really like it than try to find a used one for parts on ebay.

[MattN124]

bill682, thanks for the input.

I have been searching everywhere and cannot find parts or an entire unit for sale and I have not had any luck. (including eBay)

It seems like a great little machine, but was only made for 2-years, so not a lot of them out there.

I was hoping this website being exclusive to Cub Cadets might have somebody with some information

[ol'George]

They were not too proud of it IIRR.
Every once and a while someone comes on here that purchased one looking for parts, and never has much luck.
As much as I would like to help you, I can't.
One could fab something up possibly from some other brand.
if it runs well I honestly suggest either using it as is or trading it off to someone that needs parts.
You can do a search on here as it seems in my old foggy memory, someone a year or so ago, needed trans or axle parts.
Sort of like a Yugo car of yesteryear.
-----A red headed step child of sorts.

[allyolds68]

Originally Posted by MattN124

bill682, thanks for the input.

I have been searching everywhere and cannot find parts or an entire unit for sale and I have not had any luck. (including eBay)

It seems like a great little machine, but was only made for 2-years, so not a lot of them out there.

I was hoping this website being exclusive to Cub Cadets might have somebody with some information

I replied to your PM as well.

I know them pretty well now. Contrary to a few posts here they are pretty user friendly. The basic drivetrain was taken form the Heald Hauler which I think cub Cadet bought out in the mid 90's. All the parts are "off the shelf". Yours probably never came with front brakes as it doesn't have the integral rotor. James (the other guy on here that you reached out to) didn't have front brakes on his either. I would suggest figuring out how to mount an after market rotor and go from there. The factory front disc brake calipers just sucked. I upgraded my to a cheap chineseum caliper and they work fine. I had to fabricate a mounting bracket form 3x3 angle iron. I'll take some pics this weekend.

I beat the crap out of mine. With the locking rear differential and a few hundred pounds in the back I can plow about 8" of wet snow