|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
09-03-2024, 01:18 PM
|
||||
|
||||
One bottom plow on a 982
Hello. I have a brinly one bottom plow. Wanted to know if I could use it on a 982 with a 3-point hitch. Or would I be able to use it on an original? I would assume the seven horse motor might not be able to do it any suggestions would be greatly appreciated.
__________________
Original, 1512, ih 982, ih 682 
|
|
#2
09-03-2024, 03:39 PM
|
|||
|
|||
|
An original should handle a 10" just fine in the right conditions.A garden plot that HAS BEEN a garden plot amd NOT SOD!!
The 982 is a no brainer, if it won't handle a 10 Brinly, it ain't much of a Super!! I pull a 12" Cat 0 with my 882 all the time and a 10" sleeve hitch unit with my 128, no issues. Which hitch do you have on your 982? Good luck and have fun!!
|
|
#3
09-03-2024, 06:31 PM
|
||||
|
||||
|
Quote:
__________________
Why Farm Half When You Can Farmall? 1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
|
|
#5
09-04-2024, 06:20 AM
|
||||
|
||||
|
If your plow is the sleeve hitch type then you will need the adapter like this one to use with your cat 0 hitch.
https://www.ebay.com/itm/23487410117...AaAnhNEALw_wcB
__________________
This ain't no hobby....it's an addiction
|
|
#6
09-04-2024, 06:54 AM
|
|||
|
|||
|
What kind if a drawbar does your cat 0 have on it now.
One like this, regular Brinly type? If so, I have an adaptor for that to pull sleeve hitch attachments. No need for yet another drawbar for a specific use only. One can bolt on nearly any adaptor to this type for any chore you may need. I use mine for sleeve hitch, installing a ball hitch to moving trailers, or just plain towing a cart, roller, dethatcher, rear blade, drag, lawn sweeper you name it. Here's the one I build. If you have a Cat 0 plow or other such attachments you will need the the Cat 0 style drawbar (2nd picture) I also have available as well.
|
|
#7
09-10-2024, 02:54 PM
|
||||
|
||||
|
I ordered the cat 0 hitch adapter on eBay. And now installing it. It doesn't come with any instructions but it looks pretty straightforward. I've collected Cub cadets for many years but never used a cat 0 3 point hitch. I'm assuming the bolts are for tightening the plow once it's on. If anyone has a picture what it's supposed to look like when the plot was on I would really appreciate it. Thanks for all your help
__________________
Original, 1512, ih 982, ih 682
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Hybrid Mode
