PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Deck pully keeps coming loose?
I got all of the new bearings put in my 38'' deck for my 71 and started to mow with it. After a few passes the pulley on the left hand side of the deck, non-discharge side, loosened up. I tightened it back down, but not to much because otherwise the pully won't turn and it did the same things again. It is the only one doing it and it makes no sense to me. Anyone have any ideas, I am finally going to get a chance to mow with my cub cadet for the first time in my life and all I get it setback after setback.....
|
#2
|
|||
|
|||
deck pulley keeps coming loose
try some removable loc tight
|
#3
|
||||
|
||||
What is causing the lack of clearance? Are the new bearings seated to the correct depth?
|
#4
|
|||
|
|||
when the nut that is on top of the pulley with the grease fitting in it is tightened, to much the pulley binds up.
|
#5
|
||||
|
||||
You did recently take this spindle apart? There is a spacer attached on the bottom of the pulley.It is prolly worn.I had to replace mine on the 48 incher.
__________________
Up to 530 and counting... I give up updating my profile! |
#6
|
||||
|
||||
Did you put a washer under the pulley instead of on top? Something is causing interference that wasn't an issue before.
|
#7
|
|||
|
|||
I agree something is not right with that spindle. You're going to have to at least take the pulley off to find out why it is binding up.
__________________
More IH Cub Cadet Parts RIGHT HERE |
#8
|
|||
|
|||
underneath of my pulleys is where the bearings are there is no seal or anything. It is how the deck was so thats how I thought it was suppose to be.
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.