|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
09-29-2014, 01:26 AM
|
|||
|
|||
My 147 (pic heavy)
About 3 years ago I got the itch for a small end loader and started searching around the internet to see what my options were. Buying a new CUT tractor was out of the question. Even used ones cost too much and would be bigger than I need. Then I found the YouTube video of a 149 with a loader & backhoe and the itch turned into a “must have”. With a little more research I narrowed it down to using a 127 or 147.
Shortly thereafter this 147 came up for sale on craigslist. After making a 1-1/2 hour drive I was somewhat disappointed that the description didn’t match the reality. It had been sitting outside uncovered for around 15 years, long enough for two 3” trees to grow up between the frame and foot rest. Ugh! I was about to walk away when I decided to reach down and try to turn the engine over with the starter pulley. The engine was free and I could feel some compression. It came with a snow blower, a rototiller with both extensions and a mower deck. I figured if nothing else it would be a good parts tractor if I found something else in better shape. After giving it the usual maintenance she fired right up and has been running great since. It has a fairly good oil leak but that will be taken care of when I get around to going through the engine. All I have are before and photos. The paint on the loader, hood, dash and fender pan were done right but the rest is a quickie job. Video coming soon.          
|
|
#5
09-29-2014, 10:43 AM
|
||||
|
||||
|
Thing of beauty. That is one tough looking Sub-CUT, well done. The custom spindles look strong, tell us more about the PTO.
|
|
#7
09-29-2014, 12:54 PM
|
|||
|
|||
|
Quote:
The pump is a Northern tool .388" unit, http://www.northerntool.com/shop/too...9706_200329706. One thing I liked about it is that it can be used in either direction and with a pulley if needed. Originally I was going to run it off the back of the motor but saw a post somewhere of someone running theirs off the back of the hydro. It's a close fit. I had to rotate the upper lift bracket and cut out a little for clearance.
|
|
#8
09-29-2014, 12:43 PM
|
|||
|
|||
|
Quote:
|
|
#9
12-08-2014, 07:36 PM
|
||||
|
||||
|
Very nice looking rig you have there! Doesn't look like the same cub at at all!
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! 
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Hybrid Mode
