Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Engines > Briggs & Stratton Engines
Reload this Page Vanguard Breather Issue
Register FAQ Calendar

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-21-2023, 04:55 PM
Ducksrus Ducksrus is offline
New Member
  
Join Date: Oct 2020
Location: Tennessee
Posts: 11
Default Vanguard Breather Issue
Have a 16 HP Vanguard where oil is coming out of breather tube into air cleaner box. Have replaced head & valve cover gaskets & breather assembly. Seemed to be better last yr, but not now. Oil is at correct level & is not black, just light brown. Compression appears to be good.

Suggestions on where to look next or test?
Thanks
Reply With Quote
  #2  
Old 04-22-2023, 05:58 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
  
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default
I'm betting you have a bad head gasket. Did you get the heads nice and flat when you replaced the head gaskets?
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #3  
Old 04-22-2023, 09:40 PM
Ducksrus Ducksrus is offline
New Member
  
Join Date: Oct 2020
Location: Tennessee
Posts: 11
Default
Believe so. Surfaces were cleaned well before reassembly. Going to replace front seal just in case it is cracked or something else going on & cannot tell.
Tks
Reply With Quote
  #4  
Old 04-23-2023, 09:58 AM
West Valley G West Valley G is offline
Senior Member
  
Join Date: Mar 2016
Location: Three Forks, MT
Posts: 885
Default
Not familiar with the Vangaurd but any time I have had issues with the
breathers like you describe. It has been because of blow by at the rings.
How did the cylinder look when you had the head off?

Ken
Reply With Quote
  #5  
Old 04-23-2023, 10:54 AM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
  
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default
Clean is nice but the sealing surface needs to be FLAT.

https://www.onlycubcadets.net/forum/...ad.php?t=22831
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #6  
Old 04-24-2023, 06:17 PM
Ducksrus Ducksrus is offline
New Member
  
Join Date: Oct 2020
Location: Tennessee
Posts: 11
Default
The cylinder surfaces were dirty, but no large collection of carbon. Gently cleaned them with brush & Scotchbrite pads. Suspected the rings, but the oil stays lightly stained, not black. Sometime difficult to see oil on dipstick other than a fluid line of course. Engine does not appear to use oil, but if so it is a minor amount. So having a ring issue was not on top of list, but not sure. Compression was good on both cylinders. Wouldn't pressure be off if faulty rings?

Thanks for the link

If issue continues after replacing last seal, this may be my winter project again including rings.

Thanks
Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:03 PM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.