|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
11-02-2011, 07:12 PM
|
||||
|
||||
44A spindle pulleys
Hi all,I have a question , how do you remove the pulleys from the spindles on a 44A deck? are they pressed on,is it a tapered spindle saw they are keyed. I've about drove myself crazy trying to get it off . Like to never got the nylock nut off it! Any help would be greatly appreciated! thanks ,Brian
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! 
|
|
#2
11-02-2011, 07:33 PM
|
||||
|
||||
|
Once the nut is off, up they come. Not easy, I bent one to pieces getting it off to put another one on using pry bars. Most people say to remove the blade and take out the retaining bolts for the spindle and then drive the spindle down out the bottom of the deck thru the pulley. Spray it real good with PB Blaster too.
__________________
DWayne 1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck 10" moldboard plow 2016 XT1 42" deck 18HP
|
|
#3
11-02-2011, 08:40 PM
|
||||
|
||||
|
Thanks Dwayne,will give it another go tomorrow. The pulley is rusted pretty bad ,bearing feel like their in good shape yet. Doesn't wanna give up without a fight ,been on there 32 years!....lol
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
|
|
#4
11-03-2011, 09:17 AM
|
||||
|
||||
|
PB works great, I like croil but $$$, you could warm up the pulley w/ mapp gas. If your going to replace the pulley, heat it good. Don't heat the spindle to much you want the pulley to expand more, and repeat. Be patient, like you said it has a home there, I didn't want to move either!!
__________________
Clay
|
|
#5
11-03-2011, 08:51 PM
|
||||
|
||||
|
Well I got one off,supported the bearing flange between two 4x4 blocks and used a 10lb sledge on it and after about 5 wacks it popped off! Now for the middle one. The reason I am doing this is had to cut one stinking bolt off with the grinder,wasn't enough left to use a socket on. The first pulley was rusted away. I should have taken the bolt off the pulley before I removed the spindle assembly from the deck,may have to bolt the two remaining back up and put the blade on and try to wedge it to break it loose. I have been using kroil thats my preferred penetrating oil,not cheap but like it better than pb blaster.Hope to get some done tomorrow evening,broke my cheap-o vise trying to loosen the nut on to top the middle pulley tonight.Thanks for all your help guys!
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
|
|
#6
11-04-2011, 09:33 AM
|
||||
|
||||
|
Quote:
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Hybrid Mode
