![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
I have a 2072 with a bad bearing on the PTO. I am about to go do surgery to remove the old bearing from the Armerature to prep it for the new bearing.
Couple Questions: Does anyone have a number for the replacement bearing? When I re-install the new bearing do I just need to press the new bearing in and "gouge" retainers back into the housing or do I need to use loctite?
|
|
#2
|
||||
|
||||
|
Quote:
just re dent like origional ,IIRR be carefull of spacer, seems like put it back way it come off not end for end but it is foggy in my mind. #6305?? it is posted here, many times I ain't in the work shop to check . search if somebody don't chime in. |
|
#3
|
|||
|
|||
|
So the PTO bearing turned out to be a number 6007-2RS. I cross referenced it to a Timken 107DD which Autozone carries for $25. The bearing measures 35mm ID x 62mm OD x 14mm thick. It appears the part number for the armature on my 2072 is 959-3303, other model armatures take different bearings.
The bearing was completely gone, all the balls fell out when I removed the armature IMAG0569.jpg since the inner race of the bearing fell out,I used a Dremel with a cutoff wheel to split the outer race so I could remove it. IMAG0576.jpg IMAG0578.jpg Timken 107DD sealed bearing, which is used as a wheel bearing in automotive and ATV applications IMAG0581.jpg New Bearing in place with new dents/gouges to retain it, seems like a snap ring would have been a nicer way to retain the bearing in place IMAG0582.jpg Hope this helps somebody out someday....
__________________
Ryan Cub Cadet 2072 "Super" Cub Cadet 782
|
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.