|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
01-04-2014, 01:21 PM
|
||||
|
||||
Dash tin/decal 125
Anybody have any suggestions on how to install a new dash decal on a 125? Maple hunter says not to float the chrome backed decals on with soap and water. Tried to install it dry and quickly ruined it. Or any suggestions on restoring the original tin?
Im a bit lost. Any suggestions appreciated. The last one of these I did years ago I was still able to buy a new tin from IH. Now everyone just supplies a decal to go on the dash. Thanks Jay
__________________
Jay 40 years of Using and playing with IH Cub Cadets! Proud owner of the following: Cub Farmall, Super A Farmall, Original, (2)70's, 72, 100, 102, 123, 105, 125, 127, 108, 128, 1450, (3)782's, Yellow 982, 1782, "Sam's" 2182, M Farmall and a #7 trailer 
|
|
#2
01-04-2014, 02:04 PM
|
||||
|
||||
|
When I redid the dash on my 129, I hit the edges with fine steel wool then masked it off and repainted the black areas. Then I cut out the sections of the decal with the lettering and placed them on the tin. It's not perfect but I knew I didn't stand a chance trying to get that giant decal on straight. Besides, doing it the way I did keeps the texture in the black areas.
 
__________________
Adam 1964 Model 100 w/ K301 12hp and custom hydraulics 1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone
|
|
#5
01-04-2014, 07:13 PM
|
||||
|
||||
|
Despite what they tell you, I think you CAN float the decal on. I don't see any reason NOT to. I would try it at least. What's the down side?
I do like the paint job, though, IHinIN.
__________________
|
|
#6
01-04-2014, 08:08 PM
|
|||
|
|||
|
I would recommend the decal over the old tin! Once you get the decal where you want it on the tin use a hair drier to carefully cook the decal into the tin. go slow and keep the heat source away from the decal so as not to melt it but close enough to get it hot. this will cause the decal to sit in the low spots on the tin and appear as though it is intact a textured decal! I did this to a friends worker 1450 resto last fall we will see how it turns out over the long haul mowing his 1/2 acre every week!
|
|
#7
01-04-2014, 08:23 PM
|
||||
|
||||
|
I used soapy water, cut it into 2 pieces . Did the upper smaller part first. Then then lower. I didnt use a squeegee to push the air out. Just took my time and was very careful.
__________________
Doug Original , 100 , 125 , 582     West Central Ohio Farmall & Cub Cadet Club https://www.facebook.com/#!/groups/226681087497199/
|
|
#9
01-06-2014, 01:02 AM
|
||||
|
||||
|
125 dash tin resto
Thanks guys for the replys and suggestions. Nice to have input from several people who have done it. I have a few ideas to try now...will let you know how it turns out.
Thanks!
__________________
Jay 40 years of Using and playing with IH Cub Cadets! Proud owner of the following: Cub Farmall, Super A Farmall, Original, (2)70's, 72, 100, 102, 123, 105, 125, 127, 108, 128, 1450, (3)782's, Yellow 982, 1782, "Sam's" 2182, M Farmall and a #7 trailer
|
|
#10
01-06-2014, 07:26 PM
|
||||
|
||||
|
I like the resto of the tin. Takes a bit longer but looks really great. I did mine with some advice from member save old iron, he has some great tips.
IHinIN I forgot how awesome yours came out, great job combining paint and decals where needed, awesome
__________________
(2) Original, 100, 102, 124, 73, 800, #1 and #2 cart, brinly plows, disk, IH184, IH244, 1948 F Cub
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Hybrid Mode
