|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
10-01-2014, 12:25 AM
|
||||
|
||||
K301 make over (pics)
Bought a 105 on Ebay a couple months ago. I only went for the 105, but the fella said "on your way out you can have that 12hp engine laying in the stickers over there, it's froze up and I'll junk it anyway". I says OK and threw it on the trailer. Then he says "You can have that 125 frame in the weeds", so we threw that on the trailer too. I tore the engine down( it sure was ugly
 ) and put some work in it. I had to get it bored .030 over to get the rust out, (but it looks pretty now ). New piston, rings and connecting rod. I had the crank miced and it was fine. The key-way for the PTO side was worn bad , so I had another key-way cut 180 deg.(wanted about $300 to fix old key-way ). New valves, seats and guides. Head was flat and block is good. New plug, points, points pin and rebuilt the carburetor and fuel bowl shut off. New muffler and made my own exhaust ell (hated to pay that kind of money to buy one ). What i used is a Wagner Steel Bent Elbow, 1" Schedule 40 Pipe, 1" Inside Radius, 90 Degree, 2" Tangents($9.39). I cut 1" off one end and threaded it, then cut 3/4" off the other end (fits great). Cleaned, primed and Painted all parts and the block (not the head). I followed J-Mech's method to time it and I'm going to try to fire it ,tomorrow.  OK, enough chatter, on to the pics (we love pics)
__________________
Patience is the key to success  . The difficult, I'll do today . The impossible, I'll do tomorrow
|
|
#3
10-01-2014, 01:07 AM
|
||||
|
||||
|
Quote:
I got lucky, the rust was only in the top third of the bore, the bottom was clean and still had oil (black as coal) and no water. I only know that it was sitting in the field for several years. The intake valve was open and the air cleaner cover was missing. It was laying with the carb up, so it filled with water. The machinist I use sees a lot of these Kohlers and he told me he took all he could with the .030, but all the rust came out.
__________________
Patience is the key to success . The difficult, I'll do today . The impossible, I'll do tomorrow
|
|
#4
10-01-2014, 07:44 AM
|
|||
|
|||
|
Don't ya love it when the seller says, "You might as well take that there, and this thing over here"? Everybody likes more!
Congrats on the rebuild. You did a bang-up job and if she doesn't fire the first time, I have no doubt you'll get 'er to fire up soon!!
__________________
Stanton 1980 IH 782, Kohler M18 IH #1 Cart, original IH 42" Blade, modified to 50" and hydraulic 2015 XT2, Kawasaki 23 HP
|
|
#5
10-01-2014, 01:05 PM
|
|||
|
|||
|
Wow!
Looks fantastic. If it runs half as good as it looks you'll have a good engine.
__________________
Randy Cubs: 71, 72, 127, 149, 1440, 2186 and 1864 John Deere 110 round fender John Deere 140 H3 Sears: GTV16
|
|
#7
02-27-2015, 12:43 PM
|
|||
|
|||
|
Quote:
Thanks in advance!
|
|
#8
02-27-2015, 10:25 PM
|
||||
|
||||
|
Quote:
__________________
Patience is the key to success . The difficult, I'll do today . The impossible, I'll do tomorrow
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Hybrid Mode
