![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
I use a simplicity broadmoor to cut my grass. I have 2 cub 149 tractors. One is for snowblowing, the other is being redone to look nice. I need some help with the simplicity. I went on a simplicity forum but did not receive much help. If this is not proper, then Moderator please delete this post. When I am mowing the pto will not re-engage after being shut off with the switch. The pto is very hot to the touch. After it cools down in about an hour, it will re-engage with the switch. I use the switch that allows it to turn the blades while in reverse. I can cut all my grass this way, but if I forget and turn off the blades it will not re start them. The belt on the pto to the deck will not move after cutting the grass. It should be able to move by hand. I can release the deck belt tensioner to the pto and the deck spindles will all turn freely. Is my pto toast or could it be a switch problem? All help appreciated.
Thank you and have a great day. Bob |
|
#2
|
||||
|
||||
|
Post a couple pics of what you have and some more info like model of simp. maybe we can help.
Edit: No idea what one you have, parts tree show a bunch. http://www.partstree.com/parts/simpl...arden-tractor/
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
|
#3
|
||||
|
||||
|
Thanks for responding Sam Mac. My parts tree # is 2690947-01. I will try to take a couple of pictures this afternoon. Your help is greatly appreciated. Have a great day.
Bob |
|
#4
|
||||
|
||||
|
If it is the switch unplug the pto and see if the blades spin freely.
Looks like a cub one from a 1440,
__________________
Up to 533 and counting... I give up updating my profile! |
|
#5
|
||||
|
||||
|
Lew that style clutch has the "Air Gap/ Clutch Brake" it shouldn't spin when turned off. If I had to guess I'd say that the field coil is going bad.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
|
#6
|
||||
|
||||
|
Assuming that your numbers are correct " 2690947-01" it should have a 22HP engine.
If your clutch is dead the Simplicity part # is 1687746YP (replaces 1717664) CLUTCH (22HP Models Only) You may want to check these guys out for a replacement. http://xtremeope.com/simplicity-1687...FdgGgQodbkkHRw Make sure on the engine, the 22 is the only one that uses this clutch, the other engines have a different part number per parts tree.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
|
#7
|
||||
|
||||
|
Just wanted to post back that after I adsjusted the air gap, the pto worked great. Cut all my grass and it was hot. Shut pto off and then back on and it worked as it should. Thanks for every one's help and thanks Ol' George. You were correct when you said that too wide an air gap could cause my problem. Have a great evening.
Bob |
|
#8
|
||||
|
||||
|
Quote:
![]() Thanks for posting back that is how we all learn and makes info searchable. |
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.