|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
06-20-2009, 04:48 PM
|
||||
|
||||
International 42" Blade with Spring Trip
Need some help guys after reading the directions for a hundred times I am ready to blow it all up . For the life of me I cann't get this thing hooked up to my CC122. the rear of the sub frame on each side has notches in it , does this set on the bar that goes across and holds the right and left foot rest together? if so where does the bar that's hanging down from the tractor with the 2 pins go. OR does the frame of the plow go to these 2 pins if so this is too wide of a sub frame for the 122! Then the front of the plow frame has the mounting holes but also 2 pins where does the 2 pins go? HELP PLEASE
|
|
#3
06-20-2009, 06:37 PM
|
|||
|
|||
|
FER100:
How about some pictures of what you got...???  Diz....If I am not mistaken, the 122 is prior to the QA feature and has the "pin on" design.
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#4
06-20-2009, 08:08 PM
|
||||
|
||||
|
I cann't post any pictures my Daughter took the camera. But my front pins on the frame faces inward not outward like yours and my frame is straight not curved like yours in the back..My hydraulic unit is off the tractor so i took a pry bar and push the hydraulic cylinder back in turn my tractor peed on me so we came to the conclusion its drawn tonight. Ill leave it alone if it leaves me alone HA HA.
But tomorrow I'll try putting the back of the frame on the bar for the foot rests (some one put some large washers in there and i think if i move them around i might get it on). The bar that was in the way move when i used the crow bar. I'll have to see if the pins in the front get in the way of bolting it up. The frame does look like 2 pieces on the front sides were removed, but it looks like it will bolt up.,
|
|
#6
06-20-2009, 08:21 PM
|
|||
|
|||
|
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#7
06-20-2009, 08:25 PM
|
|||
|
|||
|
IH's first design for front mounted implements was a "pin on" or bolt on mounting. I believe starting in the 1x4/5 Series of Cubs, IH improved implement mounting with their QA (Quick Attach) concept. It made implement attachment soooo much easier.
THUS.....since you have a 122, the 42" blade would be a bolt on implement.
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#8
06-20-2009, 08:34 PM
|
||||
|
||||
|
I have the original operators manual but what you posted is a little bit different. I copied it and will compare. I did go back out and moved those washers around and got the back of the frame to set on the tractor but the steering linkage is in the way when i try to line the front up to the bolt holes either A bracket is missing or I have to find a mower mounting braket then attach the plow , (Illust 5 in that manual)
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Hybrid Mode
