|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
03-30-2013, 12:47 PM
|
||||
|
||||
Changing oil on a 104
There is a sheet of metal under the engine on my 104 I got last week and I want to change the oil, it looks like there is 4 screws holding the sheet metal
under the engine, I think if I remove the sheet metal I will find where to drain the oil, is this right, and is there a reason for the sheet metal ? 
|
|
#2
03-30-2013, 01:10 PM
|
||||
|
||||
|
Yes its under that I have a few of the "skid plates" layin around I've never had one attached to the tractor though. But the oil drain is up in there thanks for the reminder to I need to put them on both my 123 and 1650
__________________
1872 - 60"haban 54" power angle haban blade '63 Original - restoration project 582 -tiller 147 - leaf duty with bagger. 1811 - Ditch mower 800 - have it just cuz its a 800     
|
|
#3
03-30-2013, 01:35 PM
|
||||
|
||||
|
Cubby Thanks for the info. from the looks of the oil and the plate I don't think the oil has ever been changed, I think I will take the deck off and that will make it easyer to get to, and I can get it a lot cleaner,
|
|
#4
03-30-2013, 01:57 PM
|
||||
|
||||
|
taking the deck off helps quite a bit for sure, im sure it has been changed, just not in a very long time lol
__________________
1872 - 60"haban 54" power angle haban blade '63 Original - restoration project 582 -tiller 147 - leaf duty with bagger. 1811 - Ditch mower 800 - have it just cuz its a 800
|
|
#5
03-30-2013, 02:13 PM
|
||||
|
||||
|
Hi Cubby: I got two cadets in the same week, I got 1650 on a monday and the next sunday I got the 104 and I have a LT-1018 I got about 2 years ago for 100 bucks with only 87 hours on it, I also have two craftsman and two old snappers, and a 1951 Farmall Cub, and a 1953 Ferguson TO-30
   
|
|
#6
03-30-2013, 03:58 PM
|
||||
|
||||
|
nice collection, i just have a 62 original with fenders 3 point and spring assist, a 123 a 124 and a 1650, a mustang mower and two others that are similar to a mustang mower.... i dont have room for the big toys
__________________
1872 - 60"haban 54" power angle haban blade '63 Original - restoration project 582 -tiller 147 - leaf duty with bagger. 1811 - Ditch mower 800 - have it just cuz its a 800
|
|
#7
03-30-2013, 04:40 PM
|
||||
|
||||
|
I don't have much room here and don't use the big toys for much,
I have a boom pole on the Ferguson for moving metal around in the welding shop and I use the Farmall cub for brush hoging a small spot and moving trailers around, we only have an Acre and 1/4 of land, and we put up a new barn last year. 
|
|
#8
03-30-2013, 08:28 PM
|
||||
|
||||
|
Chief
At the rate you are adding Cubs to your collection you will be giving Cubcrazy a run for his money. 
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
