![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
here is a pick of the control rod off my 147, this is the one that runs to the brake from the cam. Is it supposed to have a bend in it?
|
|
#2
|
||||
|
||||
|
Patton Acres has one that fits many and is not bent. Not sure if all narrow frames are the same rod though.
http://www.pattonacres.com/cub-cadet...nk-and-spring/
|
|
#3
|
||||
|
||||
|
Upon further comparison there are some differences between yours and that one from Pattons.
From 147 chassis manual: |
|
#4
|
||||
|
||||
|
Quote:
Nighttow 1 I am quite sure there is not suppose to be a bend in that rod.
__________________
1641, 1541, 682 with 18hp command engine and hydraulics from a 782. 1872 with a power angle blade. |
|
#5
|
||||
|
||||
|
Yea that one from Patton's is for an 1800 something CC.
Here is a pic of the "speed control rod" there on the right in a 147, does not look bent here either. |
|
#6
|
||||
|
||||
|
My bad that style rod and spring are on certain wide frame tractors. My 1711 has that set up. My 1572 has a solid rod.
__________________
1641, 1541, 682 with 18hp command engine and hydraulics from a 782. 1872 with a power angle blade. |
|
#7
|
||||
|
||||
|
yes it is supposeta to be bended
__________________
Up to 533 and counting... I give up updating my profile! |
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.