PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Work Benches
I am going to finish my work bench this week, I hope. I have the frame done, just need to order the top. I am going with 1/4" or 3/8" plate depending on cost. Let's see some pictures of your work benches.
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo. |
#2
|
||||
|
||||
There's so much junk piled on mine there is no way you can see the bench!
__________________
2072 w/60" Haban 982 with 3 pt and 60" Haban 1811 with ags and 50C 124 w/hydraulic lift 782 w/mounted sprayer 2284 w/54" mowing deck |
#3
|
|||
|
|||
All mine are piled up like John's.....but one is simply a household door with the hinges screwed to the wall and two 2x4s for legs.
|
#4
|
||||
|
||||
I have one of those as well, but mine is on saw horses.
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo. |
#5
|
||||
|
||||
I plan on redoing the interior of my pole barn this summer. I need ideas! My Dad built this barn in 1973 and rigged up what he called a "temporary" work bench. It is still there! I bought the place from the estate a few years back and want to make the barn a very practical Cub Cadet fun center..including a....Cub Cadet themed bar!
__________________
Queen Of The Quietlines! |
#6
|
|||
|
|||
I have two built from 2x4 frame, MDF on top with sheetmetal on top of the MDF.
|
#7
|
||||
|
||||
Mines a mess too! Need the clean up and put some stuff away! I'm bad about that. I'd go with 1/4" plate. 1/8" if you want. That's my 2cts!
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! |
#8
|
|||
|
|||
i have a friend who works for otis elevator....you wouldnt believe what great bench tops elevator doors can make...
|
#9
|
||||
|
||||
Mine is cluttered as well, but I'm not ashamed. The top is made from solid core doors I "salvaged" from a local school being renovated (I pulled them from the dumpster before I left the jobsite). It is very solid and takes a beating without ringing like pounding on a metal table. I have a separate 2'x3' piece of 1/4" steel I set on sawhorses for welding projects. I would end up setting the clutter on fire if my main work bench was also my welding table.
image.jpg Bill |
#10
|
|||
|
|||
Mine has a solid core door for the top. I also added 1/4" Masonite on top of that. When the hardboard gets nasty enough, I'll replace it. Works well.
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.