Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Implements and Attachments

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-11-2015, 12:29 PM
Nightow1 Nightow1 is offline
Senior Member
 
Join Date: Jun 2013
Location: Nebraska
Posts: 793
Default Haban sub frame & mule drive problem.

Ok I have a complete carriage for my 2182, i bought another because the subframe was kinda messed up. So the one i just received is a little different. I was told by the dealer i bought it from its the correct one but i just dont know these darn mower decks. So the one that came with my 2182 has 5" front pulleys and the new one has 4" pulleys. The hangers are shorter. And the tube on the back side dosent have the hole through it. So im frigin lost. I sent the guy the sn ofd my deck and my tractor model. so did the PO have the wrong one or the one i just bought is right.
Reply With Quote
  #2  
Old 04-11-2015, 04:00 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

Post a pic of your deck.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #3  
Old 04-11-2015, 05:22 PM
Nightow1 Nightow1 is offline
Senior Member
 
Join Date: Jun 2013
Location: Nebraska
Posts: 793
Default

Here are a few.
Reply With Quote
  #4  
Old 04-11-2015, 05:52 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

OK you have the early style Haban. It would have had the small pulleys on the mule drive. This is what the whole thing should look like.
Attached Images
File Type: jpg IMG_1922.jpg (20.3 KB, 198 views)
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #5  
Old 04-11-2015, 05:55 PM
Nightow1 Nightow1 is offline
Senior Member
 
Join Date: Jun 2013
Location: Nebraska
Posts: 793
Default

Ok so the PO had the big 5" pulleys on they were wrong? It worked great when i used it. So I need to use the one with the 4". Thank you. I just cant seem to get my head around these decks and pulleys and frames lol.
Reply With Quote
  #6  
Old 04-11-2015, 07:33 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

If your 2182 has the 6" PTO then I would use the larger mule drive pulleys along with the larger driven pulley for the deck. I did the same thing on my 2182 with the older style deck.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #7  
Old 04-12-2015, 09:07 AM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

I converted my older style Haban like the one you have to use the larger pulleys. I use the larger mule pulleys on both of my Habans. You can change the center driven pulley on the deck, the part number is 756-3057.
First 3 pics are of the older deck, mule drive and lift carriage last 3 pics are of the newer style setup.
Attached Images
File Type: jpg IMG_3227.jpg (20.3 KB, 171 views)
File Type: jpg IMG_3228.jpg (18.9 KB, 173 views)
File Type: jpg IMG_3229.jpg (17.5 KB, 172 views)
File Type: jpg IMG_3494.jpg (19.5 KB, 173 views)
File Type: jpg IMG_3495.jpg (16.5 KB, 173 views)
File Type: jpg IMG_3487.jpg (21.8 KB, 173 views)
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #8  
Old 05-12-2017, 03:35 PM
Cub2182 Cub2182 is offline
New Member
 
Join Date: May 2017
Location: Illinois
Posts: 1
Default 2182 w/ Haban 60" Deck and Mule Drive

Ok guy's
I am brand new here on the forum and looking for advice. My 2182 w/ 60" Haban deck has been giving me fits since last season. Eats the mule drive belts, burns them, flips them over etc... I have already tried different belt types and sizes but got nowhere. I just bought a new Mule Drive from Pattons for a 2182 w/ 60" Haban deck. Removed the old mule drive and found the new one has the larger pulley's installed. Someone mentioned that you can use it but other changes have to be made? How do i know what size pulley is on the electric clutch? Any advise would be greatly appreciated. I have went thru 8 belts since the end of last season lol
I attached some pictures
Attached Images
File Type: jpg 20170511_185233_resized.jpg (21.1 KB, 103 views)
File Type: jpg 20170512_131809_resized.jpg (26.3 KB, 102 views)
File Type: jpg 20170512_131826_resized.jpg (25.9 KB, 102 views)
File Type: jpg 20170512_131841_resized.jpg (26.3 KB, 102 views)
File Type: jpg 20170512_131854_resized.jpg (25.8 KB, 102 views)
File Type: jpg 20170512_131929_resized.jpg (12.1 KB, 102 views)
File Type: jpg 20170512_131942_resized.jpg (26.9 KB, 102 views)
File Type: jpg Resized_20150526_145533.jpg (24.5 KB, 102 views)
Reply With Quote
  #9  
Old 05-12-2017, 05:01 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

OK your 2182 is an early machine. It should have the small PTO that is correct for your deck. I'd put the new mule drive on with a new belt and unless you have other problems it should work.

Here is some reading for you.
2182 #1
http://www.onlycubcadets.net/forum/s...ad.php?t=27880
http://www.onlycubcadets.net/forum/s...t=21718&page=2
http://www.onlycubcadets.net/forum/s...ad.php?t=21261
http://www.onlycubcadets.net/forum/s...ad.php?t=15421
http://www.onlycubcadets.net/forum/s...ad.php?t=16072

2182 # 2
http://www.onlycubcadets.net/forum/s...ad.php?t=35311

Haban deck info
http://www.onlycubcadets.net/forum/s...ad.php?t=33020
http://www.onlycubcadets.net/forum/s...ad.php?t=29727
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:38 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.