|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
03-08-2017, 11:54 AM
|
|||
|
|||
Foot control for hydrostat
I have a 1440 Cub/Mtd and I hate the dash speed control for the trans. Has anybody converted one to foot control ?
 James 
|
|
#2
03-08-2017, 01:13 PM
|
||||
|
||||
|
99% positive I have seen pics of it done. I want to say it was detailed on OCC. I'm sure someone will be along shortly with details.
__________________
2072 w/60" Haban 982 with 3 pt and 60" Haban 1811 with ags and 50C 124 w/hydraulic lift 782 w/mounted sprayer 2284 w/54" mowing deck
|
|
#3
03-10-2017, 10:56 AM
|
||||
|
||||
|
__________________
Larry
|
|
#4
03-10-2017, 04:09 PM
|
|||
|
|||
|
Quote:
That is pretty slick. I would probably shorten the lower bar a little title more though.
|
|
#5
03-10-2017, 05:40 PM
|
||||
|
||||
|
NOW,,, someone needs to convert it to a TWO pedal foot control.
Once you use a hydro with separate pedals for forward and reverse,, you can not consider a one pedal.  Keep your heel on the floorboard, and simply swing your ankle between the pedals. With a 1 pedal dual control,,, you are constantly holding your foot in the air. From looking at this one, I think you would only need one more rotating shaft,, and a connecting link.
|
|
#6
03-11-2017, 08:45 PM
|
|||
|
|||
|
The two pedal control is the way to go. I think you could use the pedals from a 3000 series Cub. The linkages could be modified to work on earlier Cubs.
__________________
I bought a 1864, it's just grown from there. The Cubs have replaced old Chevys as my hobby/passion. The only car I have left is a '67 Chevelle wagon. Seems like a good trade off. I can put five Cubs where one car sat and there are no titles or license to fool with! Tim
|
|
#7
04-22-2017, 12:59 PM
|
|||
|
|||
|
Check here.
http://www.onlycubcadets.net/forum/s...ad.php?t=37406 http://www.onlycubcadets.net/forum/s...ad.php?t=37377
|
|
#8
06-14-2017, 03:12 AM
|
||||
|
||||
|
I have attempted to do this to 1812. My approach has been to disconnect the factory tie rod ends and leave everything else intact. I've had it all working but my rtn wasn't working right. And it worked great until throttle up. Then it would stick on fed high till I hit the brake. I did 2 seperste pedals and used springs at the pedals for rtn. I got burned out and put it back to factory. But I think when I work on it again I'll try rtn springs at the linkage on the pump.
__________________
1812 custom cat0 3point hitch, foot pedal, 2155 JI Case 470 shuttle speed.
|
|
#10
07-04-2017, 01:06 PM
|
||||
|
||||
|
foot controll hydro
Check out this foot control
https://www.youtube.com/watch?v=L7nnhPkSg8g
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
