Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Engines > Briggs & Stratton Engines

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 07-04-2017, 12:32 PM
jkmola jkmola is offline
Member
 
Join Date: Sep 2010
Location: MI
Posts: 35
Default Thoughts on Used Vanguard

Need a little help from the pros. I came across a used Vanguard that I am thinking of picking up to repower my 682. I'm not sure this would be a good candidate or not. They already did the carb. No ideas on hours. Any opinions as what might need to be done to bring it to a workable state are welcome. This is how they described the engine:

Briggs and Stratton Vanguard horizontal shaft engine. Removed from mini skid steer. Will start and run but chokes down under power. New carb kit and fuel pump installed but did not fix the problem. Probably needs re-build. We believe it is a 20 hp.
Reply With Quote
  #2  
Old 07-04-2017, 01:34 PM
clay1811/44c's Avatar
clay1811/44c clay1811/44c is offline
Senior Member
 
Join Date: May 2012
Location: Illinois
Posts: 498
Default

Don't know on the fit for a Cub, but I would pass.
Reply With Quote
  #3  
Old 07-04-2017, 04:39 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

Quote:
Originally Posted by jkmola View Post
Need a little help from the pros. I came across a used Vanguard that I am thinking of picking up to repower my 682. I'm not sure this would be a good candidate or not. They already did the carb. No ideas on hours. Any opinions as what might need to be done to bring it to a workable state are welcome. This is how they described the engine:

Briggs and Stratton Vanguard horizontal shaft engine. Removed from mini skid steer. Will start and run but chokes down under power. New carb kit and fuel pump installed but did not fix the problem. Probably needs re-build. We believe it is a 20 hp.
Well it's hard to give you an honest opinion, you don't know the hours, HP or the true condition.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #4  
Old 07-04-2017, 04:59 PM
jkmola jkmola is offline
Member
 
Join Date: Sep 2010
Location: MI
Posts: 35
Default

Yeah, I realize that. I was just hoping someone familiar with these would say - oh yeah, probably just needs valve seals, or something really easy. Or it just needs the top end redone, and that's pretty cheap. Guess I knew in my gut I should let it go. I mean it did come off a skid steer.

I have a low hr 18hp that came off a generator, but it was propane and has the tapered shaft. I'm gonna turn an adapter on my lathe, then I just need an intake and carb off eBay and that should take care of that issue.

Thanks guys
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.