PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
Sorry to hear but glad it wasn't worse.
Sounds like it's time to design a holder for the chain hoist. I have 65lb Gilson wheel weights but luckily they have a center hole. Quote:
The head came off the hammer and hit Adam right in the mouth. Knocked two teeth out and broke another one off. That's the "weapon of choice" right there. Also in the picture is a 6" scale for size reference |
#12
|
||||
|
||||
This is what I use for the weights on my BX. They are about 110 lbs. I use my engine hoist. The long pin goes into one of the bolt holes in the wheel, the black pipe is the guide and balance handle, then I just slide the weight into place, slap the other bolts in and I'm done.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#13
|
||||
|
||||
Thanks for all the kind words guys.
I was using a hoist to lift the weight off of my workbench having just painted them. As I put the hook of my "weight lifter" into the bolt hole in the weight, the weight slid off of the bench. As the chain came tight, it rolled a loop over my little finger, crushing it between the chain and the weight. I was too busy screaming to think of many bad words. I did manage to verbalize my thoughts when I ran the damage under cold water to clean the wound! Just to reinforce the reason of this post, Be Careful!
__________________
149, 2072, Original, 1772, 1782, #1 cart, Parker 48" sweeper, |
#14
|
||||
|
||||
Holy OUCH, Doc!!! As said, thankfully it was not worse! And thanks for the words on safety .
__________________
http://www.onlycubcadets.net/forum/s...ad.php?t=42646 70, #1 cart. Brinly Cultivator. Some wheel weights. {125, 126, 2072-Sold~regrettably, 2284 60 inch Haban 325 deck., 451 snowblower, 2182-60 inch Haban 374 deck- "Money Pit", 401 Haban 54 inch dozer blade- rebuilt, 1440-down the road, Another 2182 for parts. Another 2284 for parts. 450 blower. 1812-sold, 2072 w/ Haban 374, and a 2182#3 w/ Haban 325}-------> All SOLD |
#15
|
||||
|
||||
Sounds like it was "chit happens" moment.
Here's what happens when you're just plain stupid http://weldingweb.com/showthread.php...press-accident) NOTE!!!! If you're squeamish with open wounds, do NOT click the link. Bob survived with stitches and a world class headache |
#16
|
||||
|
||||
I alsmot lost my pinky is the garage, nail fell off and took 6 months to grow back. It's a drawn out process, there are vitamins that a specific for hair, skin, and nail growth, helps speed up the process.
__________________
Cub Cadet 127, 1450, read bottom plow, blower, tiller, wheel weights, chains |
#17
|
|||
|
|||
Whoa Stan! That had to hurt.
Guess you won't be able to use that new mill........ |
#18
|
||||
|
||||
I was loading Magnum suitcase weights in the bed of my truck last month....it was cold out, and some how when it laid down enough of my finger was under it for it to hurt for a good hour +. Not as extreme as your case however!
__________________
Daniel G. . (May 1970) 147 w/an IH spring assist, 48" deck, 42" blade, 1969 73, #2 trailer, 10" Brinly plow and (on loan) Dad's #2 tiller. |
#19
|
||||
|
||||
My point exactly! These are tasks that we all do fairly frequently. It's human nature to become complacent. We all need to THINK about what we are doing. I know I'm going to try harder. It takes too long to heal at my age!
__________________
149, 2072, Original, 1772, 1782, #1 cart, Parker 48" sweeper, |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.