Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Engines > Briggs & Stratton Engines

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-22-2018, 05:26 PM
olds45512's Avatar
olds45512 olds45512 is offline
Grand Member
 
Join Date: May 2014
Location: Indiana, PA
Posts: 8,290
Default 14hp vanguard rebuild.

I got the engine out of the scrap yard 1440 and it has a broken connecting rod. The engine got some water in the one cylinder which rusted the bore a bit, I don't really have anything at home to clean it up with but I suspect it would need bored. The crank doesn't look bad but I can't get a good look at it since it's still in the block and I don't have an impact here to get the flywheel nut off. Are these engines worth rebuilding? I've found .010 pistons new and plenty of good used parts.
__________________
Tim
Pap's 100
Restored 108
1211 Dual Stick
1050
Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965
Reply With Quote
  #2  
Old 04-22-2018, 07:05 PM
Shrewcub's Avatar
Shrewcub Shrewcub is offline
Grand Member
 
Join Date: Jun 2013
Location: Nokesville, VA
Posts: 2,032
Default

I would say so. I think that is a 16hp if you take the restrictor gaskets out of the exhaust. Sam loves the Vanguards! I really like the 23 in my Super.
__________________
Travis

1993 Cub Cadet 2064
1988 Cub Cadet 2072
1980 IH Cub Cadet 782 w/CH20
1966 IH Cub Cadet 102 w/K301
1961 IH Cub Cadet O
1967 IH Cub Cadet 102 & 122

JD 2155 w/ 175 loader
Reply With Quote
  #3  
Old 04-23-2018, 08:16 AM
olds45512's Avatar
olds45512 olds45512 is offline
Grand Member
 
Join Date: May 2014
Location: Indiana, PA
Posts: 8,290
Default

Still looking for opinions.
__________________
Tim
Pap's 100
Restored 108
1211 Dual Stick
1050
Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965
Reply With Quote
  #4  
Old 04-24-2018, 10:31 AM
Dirty Steve's Avatar
Dirty Steve Dirty Steve is offline
Grand Member
 
Join Date: May 2011
Location: NY
Posts: 1,821
Default

Here is an option......

http://www.smallenginewarehouse.com/...1440-Category/

Can probably find a running 1440 cheaper than the new motor.

Did you just want the motor for another project?

You will need to push the pencil on the parts to see if it is worth it for what ever end result you want.
__________________
http://www.onlycubcadets.net/forum/s...ad.php?t=42646

70, #1 cart. Brinly Cultivator. Some wheel weights.

{125, 126, 2072-Sold~regrettably, 2284 60 inch Haban 325 deck., 451 snowblower, 2182-60 inch Haban 374 deck- "Money Pit", 401 Haban 54 inch dozer blade- rebuilt, 1440-down the road, Another 2182 for parts. Another 2284 for parts. 450 blower. 1812-sold, 2072 w/ Haban 374, and a 2182#3 w/ Haban 325}-------> All SOLD
Reply With Quote
  #5  
Old 04-24-2018, 11:31 AM
olds45512's Avatar
olds45512 olds45512 is offline
Grand Member
 
Join Date: May 2014
Location: Indiana, PA
Posts: 8,290
Default

I was hoping to use the engine to repower a different tractor. I'm gonna get the crank out one of these nights so I can get a good look at it and go from there. Pistons are about $90 each and I found a complete gasket kit, depending on the condition of the crank I could rebuild it for about $500.
__________________
Tim
Pap's 100
Restored 108
1211 Dual Stick
1050
Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965
Reply With Quote
  #6  
Old 04-24-2018, 03:14 PM
Dirty Steve's Avatar
Dirty Steve Dirty Steve is offline
Grand Member
 
Join Date: May 2011
Location: NY
Posts: 1,821
Default

https://pennstate.craigslist.org/grd...499887128.html

__________________
http://www.onlycubcadets.net/forum/s...ad.php?t=42646

70, #1 cart. Brinly Cultivator. Some wheel weights.

{125, 126, 2072-Sold~regrettably, 2284 60 inch Haban 325 deck., 451 snowblower, 2182-60 inch Haban 374 deck- "Money Pit", 401 Haban 54 inch dozer blade- rebuilt, 1440-down the road, Another 2182 for parts. Another 2284 for parts. 450 blower. 1812-sold, 2072 w/ Haban 374, and a 2182#3 w/ Haban 325}-------> All SOLD
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.