PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
Bead seater
This is my home made bead seater.buying one would have cost me $300. Its just an old L.P. tank:biggrin2.gif:
__________________
cub cadets : orignal w/ mower,orignal w/ push blade, orignal w/BB-36 snow thrower,72w/creeper,100, spirit of 76,76,55, 95 Electric,107,2-125 ,Johnson TC-10 loader, ,127,149,1100,282,382 hydro,382,482,2-IH 582,682 w/ spring blade,2-782,782D,1282,982,1782 super, and ,2-custom built 582 puller,2-narrow frame pullers,and 1-stock 582 puller |
#12
|
||||
|
||||
I need One
Jeff that is a good idea, I needed one yesterday, My Cub Cadet had a flat and I didn't see it untill I started to back out and Guess what
yep I had to put a strap around the tire to get it to seat before it would Keep Air. I need to look at my tires before I take off
__________________
Retired U.S. Navy and Happy to Live in the U.S.A |
#13
|
||||
|
||||
Post hole digger
Well the Wife let me buy another piece of property to store all my toys on, and she said I had to fence it in, it joins our other property so I only had to fence three sides, so it was going to take 36 post, and in Arkansas putting in post holes is a Big Hard Job, and i didn't want to put in Nine inch holes the size of my Digger and could not find a small digger to buy, So I went to work in the shop and Built a 2 1/2 inch Bit, and Boy did it work, We put in All 36 Post with concret in TWO DAYS
__________________
Retired U.S. Navy and Happy to Live in the U.S.A |
#14
|
|||
|
|||
What did you make the screw part from? That is a good looking bit!
I used to have a roll around tool rack like the one that started this thread, unfortunately when I am away from home a lot I need to secure my stuff and ended up with a rollcab instead. The rack saved tons of time when I was wrenching for a living.
__________________
Quietlines and narrow frames, mostly projects but I mow with a 1200 and have a 122 set up for pulls. Wandering the country bringing towers to wind farms everywhere, and bringing yellow stuff home to Texas. Also into flatfender jeeps. |
#15
|
||||
|
||||
Post Hole Digger
I used 2 1/2 inch washers that had a 1 inch hole in them and then cut one side and open or spread them open 1 inch and welded them on a 1 inch piece of round stock, the U joint is from a 1200 Goldwing motorcycle,
__________________
Retired U.S. Navy and Happy to Live in the U.S.A |
#16
|
|||
|
|||
thats not a dog wrench!!! thats an alarm system!!!
__________________
Scott Larson Climax,MN Its not cold. its gods way of keeping the rif-raf out. |
#17
|
||||
|
||||
My Cub, Not Cadet
I went over to a friends to help him with a little mowing, he did not tell me he had a little water problem in the back yard, I got her out and after a hour with a water hose she is clean again, My Wife told me Not to Help Him
__________________
Retired U.S. Navy and Happy to Live in the U.S.A |
#18
|
||||
|
||||
Funny how threads sort of evolve. I was looking forward to seeing everybody's workbenches, toolboxes, and workshops. Oh well. This is fun, too.:biggrin2.gif:
I have two bead-seaters. One for easy jobs, looks just like a cargo strap. In fact it is a cargo strap. Just strap it around the tire, then tighten it up real tight. Then apply air to the valve, and voila! Bead seated. Works for lawn tractor tires, dolly tires, and other small softer tires. For bigger tires, harder tires, I have this little can of starter fluid.....Careful now, just a quick spray....stand back....toss a match at it....voila! Tire bead seated! That way is a lot more exciting.
__________________
Tony Stafford, VA 1650, 682... |
#19
|
|||
|
|||
Quote:
Get enough ether in a tire and it will bounce 3 - 4 feet off the floor! Not so sure that this is a method that I want to pass down to the younger generation.
__________________
More IH Cub Cadet Parts RIGHT HERE |
#20
|
||||
|
||||
o0o0o0o0o... I love to play with fire anyway. That looks like fun, I had completely forgotten about using that method. Now where did I put my matches??? :biggrin2.gif:
__________________
DWayne 1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck 10" moldboard plow 2016 XT1 42" deck 18HP |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.