PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
QA-42A Rebuild Part Numbers and Information
Hi All,
As I had to do a lot of research to find the right part numbers and sources for rebuilding my QA42A Snow Thrower, I thought I would make a repository of information for future reference to help others doing the same. This information should transfer to QA-36, QA-42, QA-36A, and QA-42A throwers. Bearings: Chain Adjuster Bearings: 1" O.D. x 3/4" I.D. x 5/8" Wide full complement needle bearing with oil hole. I used Koyo B-1210-OH. Auger Bearings: 1" bore universal bearings with locking collar. 2-piece flange with 3" diameter bolt pattern. Universally available at parts stores and farm stores or online. U-Joints: Driveshaft U-joints: Napa Precision 1501 (Napa Canada Part # NPJ P1501) Snow thrower chute adjustment handle universal joint: Purchased from Cub Cadet (Part #684-04350); Also available from ccspecialities https://ccspecialties.org/implementparts_1.html Chain and Sprockets: Chain: #40 Roller chain, purchased from my local industrial supply. Auger Sprocket: Available from https://ccspecialties.org/implementparts_1.html or https://www.xtrememotorworks.com/Sno...r%20Parts.html 14T Chain Tensioner Sprocket: CCSpecialties (Part # IH-76897-C1) https://ccspecialties.org/implementparts_1.html Miscellaneous: Decals: Maple Hunters of Texas http://www.maplehunterdecalstexas.co...werQA-42A.aspx Wings, Drift Hood, drift cutters, wear edge, and skids: Xtreme Motorworks (very nice stuff) https://www.xtrememotorworks.com/Sno...r%20Parts.html Driveshaft Grease Fitting: Drilled out press-in fitting, tapped to 1/4"-28, and screwed in new 1/4" grease zerk. Chain Adjuster grease zerk fitting: CC Specialties (Part # IH-109454 Set of 2) https://ccspecialties.org/implementparts_1.html Spirol coil pin for SMALL sprocket: CC Specialties 3/16 X 1 1/4 in. (Part # IH-591184-R1) (also available from McMaster Carr) https://ccspecialties.org/implementparts_1.html Drive shaft set screws: CC Specialties (Part # 102-592) https://ccspecialties.org/implementparts_1.html Gearbox Gasket: CC Specialties (Part # IH-493543-R1) https://ccspecialties.org/implementparts_1.html Hardware: The hardware is all universal and can be purchased at your favourite local hardware store. Chain Adjuster Sprocket Shims: To help keep the sprocket aligned, use shims. CC Specialties sells them, I got some 3/4" I.D. x 1.25" O.D. shims from my local industrial supply. Gearbox Grease: Mine was filled with grease, standard multi-purpose grease is suitable.
__________________
1992 2182 with 48" deck, Kwik-Way loader, and QA42A Snow Thrower 2008 RZT 54 |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.