PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1782 is a beast
Got the 54" Hydraulic plow installed, got the wheel weights installed and installed the new set of chains, tractor wouldn't stat. Put the charger on it, still no go. Plowed with the 1440. Started checking connections at the battery, low and behold, 1/4" bolts going through the 5/16" connections were loose. Cleaned all with a wire brush, installed 5/16" bolts with lock washers, started just fine . This past small snowfall I got to try it out. Love the Hydraulic lift and blade swivel, also the power steering. The tractor is a beast, nice power with even 1/4 throttle. Not use to the blade lift control just yet, my loader tractor was pullback to lift and forward drop. This forward to lift screws me up. If my brain can't be trained, I'll just have to switch the Hydraulic lines.
|
#2
|
||||
|
||||
Quote:
__________________
Why Farm Half When You Can Farmall? 1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck |
#3
|
||||
|
||||
I believe they are the same on the 3k machines. The center pin that controls the oil flow got turned 180* so now up is down and down is up......ask me how I know this. Pull the handle off and turn it 180* and you should be good to go.
__________________
This ain't no hobby....it's an addiction |
#4
|
|||
|
|||
Thanks! I'll take a look at that.
|
#5
|
||||
|
||||
This is a random question, but does anyone know why the 782 wasn't originally the 1782, and the 982 and 1982?
Odd to me that IH left the normal designations, then CCC went right back (171X, 181X, 191X) ... 1X82.
__________________
Why Farm Half When You Can Farmall? 1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck |
#6
|
|||
|
|||
I think the ccc 782 I had was 17hp, this 1872 is an 18hp Super, a little longer frame, bigger wheels too.
|
#7
|
|||
|
|||
According to the arrow on the dash, pulling the lever down, drops the deck and raising it up raises the deck. Same is true with the snow/dozer blade. So it is working correctly, my past experience with the loader tractor, and fork lifts. Pulling the lever , raises the bucket or the forks, and pushing it drops the bucket or the forks. I just have to retrain my brain for this operation. I don't have a loader tractor anymore, and I haven't driven a fork lift in 10yrs, so maybe this "old dog can learn a new trick" Happy New Year!
|
#8
|
||||
|
||||
Quote:
It's funny they dropped the "1" off then used the number later for a different tractor.
__________________
Why Farm Half When You Can Farmall? 1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.