Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Engines > Briggs & Stratton Engines

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 06-11-2022, 11:25 AM
joegyoung joegyoung is offline
New Member
 
Join Date: Jun 2022
Location: NC
Posts: 1
Default B&S 16 hp engine replacement, go 18? or 22?

I have a 1641 with a 16HP B&S engine # 303447-1147. I got this for almost nothing as it had been left out and water was in the cylinders. It was also blowing oil all over the place. I am thinking of replacing the engine instead of rebuilting. Has anyone replace with the higher HP engines like the 18 or 22 HP ones? does more power cause any issues with the hydraulic dive train? Can't think it would have any effect on the PTO mowing deck.

I have mow about 4 acres in a mountain cove bottom that is wet with springs I think I am going to really like this tractor after so many years of diposible riding lawn mowers. So I want this to last.
Reply With Quote
  #2  
Old 06-11-2022, 12:07 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

No problem going to the higher HP engines.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #3  
Old 06-11-2022, 01:01 PM
1711Cub's Avatar
1711Cub 1711Cub is offline
Senior Member
 
Join Date: May 2020
Location: Elkland, PA
Posts: 750
Lightbulb

I would minimally recommend a Kohler Magnum 18/20, or the later V twin Command. Properly cared for they will last for decades. Not a fan of anything larger Briggs..
__________________

582, 682, 782, 782D, 1282, 1050, 1210 x 2, 1711, and 1811
Reply With Quote
  #4  
Old 06-12-2022, 11:17 AM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
 
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,103
Default

Quote:
Originally Posted by 1711Cub View Post
I would minimally recommend a Kohler Magnum 18/20, or the later V twin Command. Properly cared for they will last for decades. Not a fan of anything larger Briggs..
The opposed twin I/Cs are pretty good engines. Same for the ones you might find in a Craftsman.
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #5  
Old 06-12-2022, 11:35 PM
guyina4x4's Avatar
guyina4x4 guyina4x4 is offline
Senior Member
 
Join Date: Sep 2017
Location: IL
Posts: 270
Default

Pretty sure the 1641 has a Vanguard engine.
One of the better briggs engines.
I do prefer the kohler commands myself but the Vanguard is a great smooth running engine when it's right.
__________________
JD x475
Reply With Quote
  #6  
Old 06-13-2022, 11:45 AM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
 
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,103
Default

Quote:
Originally Posted by guyina4x4 View Post
Pretty sure the 1641 has a Vanguard engine.
One of the better briggs engines.
I do prefer the kohler commands myself but the Vanguard is a great smooth running engine when it's right.
Agreed and correct. Just keep them clean b/c the valve guides drift if they overheat (shouldn't have to say that, but I do).
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #7  
Old 06-13-2022, 01:58 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

Going with a larger Vanguard is a plug and play swap, anything else will require a muffler, a drive shaft, a muffler heat shield and some rewiring. Vanguards are great engines. The last 1641was built in 1997 so this one is at least 25 years old. I'd say that's pretty reliable.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.