Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Lawn Tractor (LT)
Reload this Page 2135 Mower Deck
Register FAQ Calendar

Notices

Reply
Page 2 of 2 1 2
 
Thread Tools Display Modes
  #11  
Old 09-10-2022, 08:00 AM
jsoluna's Avatar
jsoluna jsoluna is offline
Senior Member
  
Join Date: May 2011
Location: Ohio
Posts: 411
Default
Quote:
Originally Posted by Carverlvr View Post
Where do I start? Does raising and lowering the deck affect belt tension or alignment? I lower it a couple notches to mow then all the way back up to store.
Yes, it does affect tension. There is less belt tension with the deck in the highest position on the 2000 Series in general. The 38 and 42 decks, particularly.
__________________
http://www.solunagarage.com
Reply With Quote
  #12  
Old 09-19-2022, 10:53 PM
Carverlvr Carverlvr is offline
Member
  
Join Date: Jun 2022
Location: IL
Posts: 30
Default
Is there anything I can do to address the loose belt at high deck setting? New belt, or spring?
Reply With Quote
  #13  
Old 09-22-2022, 10:02 AM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
  
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default
Post some pics showing the top of the deck, the belt, the pulleys and the spring so that we can see what you have going on.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #14  
Old 09-22-2022, 08:54 PM
Ozcub's Avatar
Ozcub Ozcub is offline
Senior Member
  
Join Date: Apr 2012
Location: outskirts of Sydney NSW Australia
Posts: 993
Default
The rear lift arms are angled from top to bottom towards front of mower so that as you raise the deck it moves up and back slightly to maintain tension on belt
If your deck is not moving backward as you raised it the first thing I would check is the front hanger , second would be the deck drive pulley tension spring
Photos would assist
__________________
My wife says I do not listen , at least I think thats what she said
Reply With Quote
  #15  
Old 10-02-2022, 06:56 PM
Carverlvr Carverlvr is offline
Member
  
Join Date: Jun 2022
Location: IL
Posts: 30
Default
Well, it took me forever to even get out to take a pic and not sure these will even help but here’s what I’m working with…
Attached Images
File Type: jpg A91DF531-3852-482F-B2DD-5FF483D60564.jpg (24.9 KB, 43 views)
File Type: jpg A063F0FA-E3E3-437E-8C25-49ED6F9A65E3.jpg (24.7 KB, 40 views)
File Type: jpg 8B4CEDED-0BF2-4CA5-BAEF-B5DFE0703238.jpg (25.3 KB, 43 views)
Reply With Quote
  #16  
Old 10-03-2022, 02:58 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
  
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default
I don't see any obvious problems that would cause your problem. Just make sure that the tension-er is nice and free. The item in the red box.
Attached Images
File Type: jpg 8B4CEDED-0BF2-4CA5-BAEF-B5DFE0703238.jpg (25.4 KB, 38 views)
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #17  
Old 10-04-2022, 06:53 PM
Carverlvr Carverlvr is offline
Member
  
Join Date: Jun 2022
Location: IL
Posts: 30
Default
Sam Mac,
I went to mow and the deck belt slipped off again. Every time it happens I notice the tension spring has also come off it’s post but assumed it was because the belt was off the pulleys…now wondering if the reverse is the cause. I dropped the deck and yes, the tensioner is moving freely and I closed the end loops on the tensioner pulley spring just in case. I also cleaned under the deck while I had it down but also found I’m due for a new belt. Is this cause or effect?
Attached Images
File Type: jpg 516D2C2A-3FF1-4A94-BF20-FE98BADCA327.jpg (34.5 KB, 30 views)
File Type: jpg 56D16F97-C408-4BD2-A05A-455BA94DEC55.jpg (31.6 KB, 30 views)
Reply With Quote
  #18  
Old 10-06-2022, 12:37 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
  
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default
You definitely need a new belt. While you have the deck off check that the belt tensioners pivot freely.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #19  
Old 10-08-2022, 04:02 PM
Carverlvr Carverlvr is offline
Member
  
Join Date: Jun 2022
Location: IL
Posts: 30
Default
Put a new deck belt and pto belt on today. BIG difference in tension on the deck belt! Guess the old one had stretched? Did a quick mow with it. All is good so far.
Reply With Quote
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:23 AM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.