Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Engines > Kohler Engines

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 01-13-2023, 04:37 PM
dukejm dukejm is offline
New Member
 
Join Date: Mar 2019
Location: Pennsylvania
Posts: 11
Default Starting rebuild on the 1450 K321

Well I started the process of getting the motor rebuilt on my 1450 Cub
Kohler K321AQS-60291d, SN 7541500
1450 SN is 626963

The engine is at the shop here in Western PA getting checked out for machining.

In the meantime I have a bunch of questions I hope the members can help me with.

First one being the ignition coil,
The one on the motor is a Bosch (0 221 119 009) and I think it may not be the correct one. Even if it was when installed, based on my checks today, its weak.
Only get 1.7 Ohms + to - terminal
+ terminal to tower looks ok at 8970 Ohms
no Ohms (infinity) from case ground to any terminals.
The motor ran with this one before I pulled it but wanted to replace it as part of the rebuild.

Any suggestions for a good aftermarket coil? And where to find one?
The Kohler coil from Cub dealer is $130

FYI - already did the engine cradle modification and replaced the rubber motor mounts prior, and have new Kohler points and condenser to install once back from machine shop.

Any other suggestions on what to look for and/or replace are also appreciated.

Pictures now posted.

Attached Images
File Type: jpg IMG_6919.jpg (42.6 KB, 108 views)
File Type: jpg IMG_6931.jpg (31.5 KB, 106 views)
File Type: jpg IMG_6906.jpg (34.7 KB, 107 views)
File Type: jpg IMG_6938.jpg (20.0 KB, 106 views)
File Type: jpg IMG_6940.jpg (18.5 KB, 105 views)
Reply With Quote
  #2  
Old 01-13-2023, 08:41 PM
finsruskw finsruskw is online now
Grand Member
 
Join Date: Mar 2013
Location: Iowa
Posts: 3,115
Default

I usually replace the governor and governor arm bushing as well when doing an overhaul.
Don't forget to static time the unit while it's still on the bench.
Much easier that way.
Reply With Quote
  #3  
Old 05-04-2023, 07:33 PM
dukejm dukejm is offline
New Member
 
Join Date: Mar 2019
Location: Pennsylvania
Posts: 11
Default Putting her back together and have question

Well I finally got the K321 back from the machine shop,
Put it back in the tractor and ran it for 15-20 minutes and then retorqued the head bolts after cool down and started putting the Tin back on it and noticed that the spark plug hole is in a different location in the replacement cylinder head the shop put on due to the original being cracked. Noticed because the tin didn' fit correctly. Original head had spark plug located more over the exhaust valve, the replacement head is more centered between the valves.

My question is, will this new location make any difference in its performance? I can just open up the clearance hole on the tin.

Seemed to run fine during the 15 minute run but did not put any load on it. Wanted to get input from the group before I went any further with it.

See pictures
Attached Images
File Type: jpg IMG_7246.jpg (35.6 KB, 49 views)
File Type: jpg IMG_7247 old head.jpg (33.5 KB, 52 views)
File Type: jpg IMG_7248 replacement head.jpg (36.1 KB, 50 views)
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.