|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
11-24-2020, 09:55 PM
|
||||
|
||||
1864 minor improvements...
I've finished mowing for the season and have begun cleaning up my equipment for use next year...
When removing the deck from the tractor followed by the side panels from the engine, I was reminded about a few improvements that were made when restoring my 1864 tractor with the #324, 54" deck. These improvements were made after reading a post by Sam Mac concerning the deck blowing grass out the front, causing clippings to get sucked into the engine through the cooling fan. Not good for keeping the engine cool or clean! Sam mounted a piece of rubber belting across the front of his deck. Problem solved!  I decided to try solving the problem in a less noticeable manner. The solution for me was to attach an "L" shaped strip of metal to the inside front of the deck. Problem solved! The strip I installed is even with the projection of the blades and serves to contain the clippings from escaping out the front. (The metal strip was made from our old recycled air conditioner cabinet.) I was able to curve the metal strip to fit the contour of the deck by snipping some kerfs on the edge, allowing it to be bent to fit. I also added a corner piece to "round out" the deck housing around the left blade. This helps to keep grass from building up in the corner of the deck, which will cause the front corner to rust through over time. My deck was rusted through and had to be repaired. One other improvement that was made on the tractor was to add a stainless steel strainer over the air intake on the engine to keep it extra clean and cool for long life. It was a little tricky to get it installed just right, however with some patience, I was able to get it to fit in the limited space with the drive shaft coming through the strainer in exactly the right spot! I was quite pleased with how clean the side panels and engine looked after mowing all summer long. The deck looked pretty good too! To help keep things looking good, I blow the tractor off with compressed air each time after mowing. No water, just air! See pics... I recall having lots of fun figuring out and installing these improvements, which have significantly improved the operation of my Cub Cadet!  Sincere thanks and appreciation to Sam Mac for the information and experience shared on the OCC website!
|
|
#2
11-25-2020, 07:17 AM
|
||||
|
||||
|
Those are all great improvements.
Great idea about the strainer. I will have to use that one. .
|
|
#3
11-25-2020, 07:26 AM
|
||||
|
||||
|
Great ideas Gary. I may give them a shot. You have the cleanest 1864 I've ever seen.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#4
11-25-2020, 08:05 AM
|
||||
|
||||
|
That Stainless Strainer looks like a great idea...BUT ...a real pain to install
|
|
#5
11-25-2020, 11:29 AM
|
|||
|
|||
|
I like the strainer and the deck modifications.
I wonder how long it will take my wife to notice her strainer is missing. She will never find it in the tractor if I install while she is out shopping.
__________________
1863, 1864, 48" and 54" mower decks, 54" snow plow, 451 snow blower, TracVac 580
|
|
#6
11-25-2020, 11:59 AM
|
|||
|
|||
|
Quote:
Great ideas and mods. Agree with Sam--very clean indeed. Good work!
|
|
#8
05-24-2023, 09:18 AM
|
||||
|
||||
|
My only thought is "holy crap that thing is clean! Nice work on the modifications to keep it that way too.
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
