PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
192-400 Tiller
I'm helping a friend with his 192-400 tiller, I was able to get the Briggs 8 HP running and the tines to engage properly. As we mounted it on the tractor it doesn't appear to have as much lift as I would think is correct, it does not lift high enough for the tail wheel to separate from the ground. Is this common for these tillers?
Does anyone have a picture or operators manual that shows correct mounting/attachment to the tractor?
__________________
CC Tractors: 1650, 1200, 800, 149, 125, 86, 782D, 2072, 1572, Original |
#2
|
|||
|
|||
I sold one a while back so I am going a bit off memory here. The support
wheel does not clear the ground at all. Since there is no center link coming from the tractor to the tiller. It only pivots on the lift arms. Always worked just fine but I have to do a lot of backing up in my garden so it didn't work to well for me. KenDSCN0774.jpg DSCN0778.jpg |
#3
|
||||
|
||||
Thanks for the pictures!
The 400 tiller in question is on a 1650, it has a sleeve hitch adapter on it I was worried was limiting the vertical lift travel. I'll try and post a picture tonight.
__________________
CC Tractors: 1650, 1200, 800, 149, 125, 86, 782D, 2072, 1572, Original |
#4
|
|||
|
|||
three point cat o tiller with the third wheel
Hi I have that model. Used on my 782d with three point cat o
the rear wheel is the only suppor for depth and height as the tiller does not have a provision for the adjustable upper link arm. mine just barely had enough lift to keep the tines from the yard. sort of how they designed it. |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.