Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 07-16-2024, 03:11 PM
ccpullin ccpullin is offline
Senior Member
 
Join Date: Oct 2009
Location: Iowa
Posts: 166
Default Super Steer Axle Question

I have a 1512 Diesel Cub that I removed a 50" deck and placed a 54" later model tall deck on along with the hanger for it and used the 1512 mule drive. Has 12x12x24 rear tires (zero turn size) so the tractor sits just a little higher in the rear. Deck fits fine, mows fine, clears front and rear tires even when turning. Issue is when I raise the deck the rear will lift 1 1/2" and the front only about 1/2". I adjusted the front of the deck all the way up. I could go to taller tires on the front although they might hit the deck when turning. I have a Super Steer axle that I was considering installing that will move the front wheels forward although I don't know if it will raise the front of the tractor up. I measured the distance between the center axle pivot bolt and center of the spindles outer tip and both the Super Steer and the stock axle are the same 4". I have read several articles here with some stating it will raise the tractor 2" and others saying it will be the same height. Also some mentioned a difference between the 1861, 1862, 1863 & 1864 although when I look up the part numbers through Cub Cadet they show the same axle and spindles part numbers for all 4 models throughout their productions years. So my question is am I going to gain any front end height along with mower raising height changing axles with them measuring the same 4"? I know the axle will move the tires forward but that is not necessary.
Reply With Quote
  #2  
Old 07-16-2024, 04:20 PM
darkminion_17's Avatar
darkminion_17 darkminion_17 is offline
Grand Member
 
Join Date: Aug 2010
Location: New Jersey
Posts: 11,093
Default

good info.
https://www.onlycubcadets.net/forum/...ad.php?t=61553
__________________
Up to 530 and counting...
I give up updating my profile!
Reply With Quote
  #3  
Old 07-16-2024, 04:26 PM
darkminion_17's Avatar
darkminion_17 darkminion_17 is offline
Grand Member
 
Join Date: Aug 2010
Location: New Jersey
Posts: 11,093
Default

more good pics.

https://www.onlycubcadets.net/forum/...ad.php?t=36814
__________________
Up to 530 and counting...
I give up updating my profile!
Reply With Quote
  #4  
Old 07-16-2024, 08:31 PM
ccpullin ccpullin is offline
Senior Member
 
Join Date: Oct 2009
Location: Iowa
Posts: 166
Default

Thank you! That information helps. Seems I have a Super Steer axle with the casting number of 719-3070 which came from an early 1862 for a 44" or 50" deck as it has the shorter spindles and the steering arm with two 1/2 holes in it for a power steering cylinder use.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:57 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.