|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
07-24-2011, 12:44 AM
|
||||
|
||||
Carb replacement?
My new to me 129 has some carb issues, seems to load up past 3/4 throttle. I though I might try adjusting it some, but it turns out it has a walbro on it, would like to replace it with a #26.
SO, my question is what exactly would I need to swap them out, the walbro has a different linkage on it to the governor arm (compared to the #30 on the 149 I have), so I am guessing just the carb and the linkage and I am golden. Does the air cleaner base bolt to both carbs the same or do I need a base for a #26. Appreciate the help, thanks!
__________________
Jeff Brookfield, MO ________________ IH Red 782 with weights and sleeve hitch! IH snow blade, Brinly plow, Brinly disk, Brinly harrow, Johnson rear blade, and a #2 IH Cart 
|
|
#3
07-24-2011, 10:47 AM
|
||||
|
||||
|
Would you have pics of the carb? I just bought a brand new Walbro at TSC for 160$ I'm happy with it. It is not a fixed jet Walbro.
__________________
1971 128,3pt,ags,rebuilt motor,headlights 1988 1812,dual ports 1966 122,creeper,3pt,ags,sa,headlights,restored 1st place at RPRU 2013 1966 123,3pt,brinly spring assist 1973 108 1968 125 Attachments:QA36A,wfblade,2 nf blades,brinly disc,a cultivator,plow,homemade wrecker boom with 2000lbs winch,ih weights,50lbs weights,2IH windbreakers
|
|
#4
07-24-2011, 11:23 AM
|
||||
|
||||
|
Quote:
You won't be as happy with it when you want to rebuild it. The carb kit is something like $30. The Walbro carbs also have a non-replaceable fuel inlet seat and a plastic float. Today's gas wrecks the plastic floats, and when the needle and seat wear out, you're basically SOL.
|
|
#5
07-24-2011, 01:13 PM
|
||||
|
||||
|
Mine has the sealed adjustments on it, I haven't heard much good about them, so I would just as soon get a rebuildable 26 and toss on it. They are relatively cheap, cheap to rebuild, and simple in design, much better in my opinion.
Thanks Matt, was thinking that was all I needed, but wanted to make sure....this time I will leave the choke butterflies in place when I toss it in the carb cleaner.
__________________
Jeff Brookfield, MO ________________ IH Red 782 with weights and sleeve hitch! IH snow blade, Brinly plow, Brinly disk, Brinly harrow, Johnson rear blade, and a #2 IH Cart
|
|
#6
07-24-2011, 10:31 PM
|
||||
|
||||
|
I hate the Walbro's but i could not find a carter i have two that are rebuilt but the fuel screw holes are striped out i asked a round no one had one. I'm happy with it so far.
__________________
1971 128,3pt,ags,rebuilt motor,headlights 1988 1812,dual ports 1966 122,creeper,3pt,ags,sa,headlights,restored 1st place at RPRU 2013 1966 123,3pt,brinly spring assist 1973 108 1968 125 Attachments:QA36A,wfblade,2 nf blades,brinly disc,a cultivator,plow,homemade wrecker boom with 2000lbs winch,ih weights,50lbs weights,2IH windbreakers
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
