|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
10-29-2019, 05:22 PM
|
|||
|
|||
Snow Plow Angle Mechanism
I have attached some pics of a snowplow angle mechanism that I saw on a Simplicty lawn tractor. Most impressive parts of the mechanism are the following:
1.) when the operator pushes forward on the angle rod the angle lock mechanism temporarily unlocks; and 2.) when the angle rod is rotated, the plow angle rotates. This is all accomplished with manual mechanical method (no electrics nor hydraulics used). Does anybody have any experience with this type of angle mechanism? 
|
|
#2
10-29-2019, 06:01 PM
|
|||
|
|||
|
I was have trouble editing. Instead, a 2nd posting on same subject.
I have attached a parts schematic (as one more pic) obtained from Jack's Small Engines. See: https://az417944.vo.msecnd.net/diagr...de/diagram.gif
|
|
#4
10-30-2019, 11:37 AM
|
|||
|
|||
|
The problem is that IH built Push Blades have a "pull up" pin that needs to be lifted to angle the blade.
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#5
11-01-2019, 01:11 PM
|
|||
|
|||
|
Quote:
|
|
#6
12-08-2019, 01:59 PM
|
||||
|
||||
|
I’ve started working on an angle mechanism for my blade. So far, I figured out how to convert the vertical pin to a sideways pull setup that will be actuated by a bike brake cable or choke cable.
__________________
Adam 1964 Model 100 w/ K301 12hp and custom hydraulics 1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone
|
|
#7
12-14-2019, 08:03 PM
|
||||
|
||||
|
I almost have it done. The lock pin release works well. The pipe needs an offset to connect to the rod end and clear the front tire.
__________________
Adam 1964 Model 100 w/ K301 12hp and custom hydraulics 1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone
|
|
#9
12-15-2019, 09:40 AM
|
||||
|
||||
|
Nice work!
__________________
125, 126, 147, 129, 149 x 2, 1450, 882, 1810, 1320, 1440, 2135, 2 129’s for parts/project, 1950 Farmall Cub 38" LT mower deck, 4 42" triangle mower decks, 2 44A mower decks, 2 50C mower decks, 42” GT deck, 3 42" snow/dirt blades, 42" landscape rake, #4 cart      
|
|
#10
12-15-2019, 02:29 PM
|
||||
|
||||
|
Thanks guys! Finished the release mechanism. The cable will get shortened after I finish the angling pipe.
__________________
Adam 1964 Model 100 w/ K301 12hp and custom hydraulics 1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone
|
|
| Tags |
| plow angle, simplicty, snow plow |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
