|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
07-30-2015, 10:08 AM
|
|||
|
|||
44C and 44A mowing decks
I'm sure this has been talked about many times so I apologize in advance.
I have a couple of 1650's and three mowing decks for them. Two 44A's and one 44C. I am currently doing a total rebuild on the 44C deck with the matching mule drive. Besides the center pulley, front mule drive pulleys and moving the deck hangers to the outter holes on the deck what else needs to be changed in order for me to hang the C deck under my 1650? Looking at the C mule drive next to the A drive there are considerable differences. the C drive seems beefier and the middle secition of the mule drive is curved where as the A's aren't. Can i change that middle section out with an A portion so the deck can hang with out belt interference? I'm not sure if I have articulated myself well enough there. I'll post pictures if needed. Thanks again! If there is a thread that already answers this can one tell me how to find it? Scott 
|
|
#2
07-30-2015, 09:12 PM
|
||||
|
||||
|
I moved a center pulley from a 44a deck to a 50c deck for use on a 1450. I've only used it once so far but it worked great. I think I only have 'A' mule drives but would have to check.
__________________
- Tim 1872 60" Haban deck- 2082 450 blower, 50c deck - 1450,1650 2x44a deck, QA-42A snowthrower, 70 w/k181(destroyed) 38" pin on deck
|
|
#3
08-04-2015, 11:49 PM
|
||||
|
||||
|
The 44a deck uses the straight pulley setup in front and the 44c deck needs the angled pulley setup in front because the center pulleys on the decks are not in the same place. The 44c center pulley is not centered with the tractor. I have a problem with the belt, I have a 44c deck and need a belt. Shopping on line I have come up with two different sizes for the same number belt. Which one is correct.
Cub Cadet 954-3004 BELT-V 1/2 X 77.1" Cub Cadet Super Heavy Duty Kevlar Aramid V-Belt 954-3004 1/2" x 78"
__________________
1977 1650 with cast iron lower grill housing, cast iron oil pan, 54" push-snow blade, rear blade, disc-harrow, 44c and 48" decks, Two cultivators, #1 tiller with both extensions, loaded tires, 75' weights and chains, #2 cart.
|
|
#4
08-05-2015, 12:16 AM
|
||||
|
||||
|
I'm thinking the quietlines a series were angled slightly?? And the c series 82 model Cubs were straight?
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! 
|
|
#5
08-05-2015, 07:06 PM
|
||||
|
||||
|
I think both the 44A and 44C have the same pulley positions, and both need an angled mule drive. IIRC, the 44c uses a wider belt (would have wider pulleys on both the deck and the mule drive) because the 82 series tractors have a wider pulley on the PTO. It's like 1/2 inch vs. 5/8 inch belts. (or is it 3/8 and 1/2? not sure).,
Either way, to use a 44C on a QL, just change the center drive pulley on the deck to a smaller diameter (to keep the blade speed up) and proper belt size. Continue to use the 1650's mule drive.
__________________
|
|
#7
08-11-2015, 10:43 AM
|
||||
|
||||
|
Looks good, now get some green on it.
__________________
Tim Pap's 100 Restored 108 1211 Dual Stick 1050 Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965
|
|
#10
08-11-2015, 11:06 AM
|
||||
|
||||
|
It's just a coating (paint) that many put on the underside to help grass from sticking. It's not a part you are missing
__________________
Terry O,100,72,102,123,104,124,105 125,129,149,1200,982 (2)2182s w/60in Habans 3225
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
