Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Resources > Restoration Tips

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 03-26-2018, 12:42 PM
Vrobert's Avatar
Vrobert Vrobert is offline
Senior Member
 
Join Date: Sep 2017
Location: MD
Posts: 274
Default Dust cyclone

I have been working on a sandblasting cabinet and a 60 gallon compressor to do some restoration blasting. The cabinet needs a vacuum attached to collect the blasted debris which keeps the media cleaner and improves visibility while blasting. A friend has a similar blasting setup and he purchased a Dust Deputy to keep his shop vac filter from clogging. The Dust deputy works great but it's about $60 and its big and top heavy when mounted on a 5 gallon bucket. I decided to buy a Chinese cast aluminum copy that mounts inside a 1 or 5 gallon bucket rather than on top. It fits the smaller 1 1/8" vacuum hose (sort of). The tubes on the cyclone are 1" OD but I had a few extra hose extension pieces that I cut up and attached to it.

Preliminary review is good. I blasted a small rusty bracket and the bucket collected a handful of fine rusty dust. These aluminum cyclones are only about 7" tall and cost around $22 on ebay. Compare my one gallon setup to the 5 gallon Dust Deputy. For woodworking the larger setup would be necessary because sawdust would fill that bucket pretty quick but sandblasting a few small items each week wont generate that much volume.
Attached Images
File Type: jpg dust cyclone.jpg (26.3 KB, 131 views)
File Type: jpg Dust deputy.jpg (74.8 KB, 130 views)
File Type: jpg dust cyclone dimensions.jpg (13.9 KB, 130 views)
__________________
Rusty 149 project with:
QA42 snow thrower
38" deck

Barn fresh 1811 with:
44c mowing deck
QA42A snow thrower
42" snow blade
Reply With Quote
  #2  
Old 03-26-2018, 12:50 PM
CADplans's Avatar
CADplans CADplans is offline
Grand Member
 
Join Date: Oct 2011
Location: VA
Posts: 3,502
Default

I purchased the dust deputy,,, and, I am SHOCKED how much vacuum is lost due to it.

Yes, it removes the dust, but, about half the suction power is used removing the dirt.

For specific things, sanding, etc,, it is great.
sweeping the dirty shop takes forever, because of the lost vacuum.

The vacuum is not lost due to leaks,, the vacuum simply has half the velocity at the pickup point.

Part of the problem is all the extra hose,,,
Reply With Quote
  #3  
Old 03-26-2018, 01:00 PM
MikeMasheris's Avatar
MikeMasheris MikeMasheris is offline
Senior Member
 
Join Date: May 2012
Location: South Elgin, Illinois
Posts: 283
Default

Looks like a small turbo housing?
Reply With Quote
  #4  
Old 03-26-2018, 01:29 PM
finsruskw finsruskw is offline
Grand Member
 
Join Date: Mar 2013
Location: Iowa
Posts: 3,115
Default

You would be surprised at how much quicker a rusted part will clean up in your blaster if you soak it in vinegar for a day or so.

Try it!
Reply With Quote
  #5  
Old 03-26-2018, 10:18 PM
john hall's Avatar
john hall john hall is offline
Grand Member
 
Join Date: Jul 2009
Location: Durham, NC
Posts: 3,095
Default

Quote:
Originally Posted by CADplans View Post
I purchased the dust deputy,,, and, I am SHOCKED how much vacuum is lost due to it.

Yes, it removes the dust, but, about half the suction power is used removing the dirt.

For specific things, sanding, etc,, it is great.
sweeping the dirty shop takes forever, because of the lost vacuum.

,,
You SWEEP your shop floor??? I thought that's what leaf blowers are for.
__________________
2072 w/60" Haban
982 with 3 pt and 60" Haban
1811 with ags and 50C
124 w/hydraulic lift
782 w/mounted sprayer
2284 w/54" mowing deck
Reply With Quote
  #6  
Old 03-26-2018, 11:39 PM
CADplans's Avatar
CADplans CADplans is offline
Grand Member
 
Join Date: Oct 2011
Location: VA
Posts: 3,502
Default

Quote:
Originally Posted by john hall View Post
You SWEEP your shop floor??? I thought that's what leaf blowers are for.
I had the vortex, I had to try it out,,,
THEN out came the Stihl BR600,,,,
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:20 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.