Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > IH Cub Cadet Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 11-30-2010, 12:08 AM
JaysNJcub127's Avatar
JaysNJcub127 JaysNJcub127 is offline
Senior Member
 
Join Date: Jun 2010
Location: New Jersey
Posts: 471
Default #26 carb idle fuel inlet

I need a "idle fuel inlet" for my #26 carb. Someone had previously tried to remove it from my carb and it was all jagged and messed up. I had to ues a easy out to get it out. Where can i get a new one? thanks
Reply With Quote
  #2  
Old 11-30-2010, 06:53 AM
R Bedell R Bedell is offline
Inactive Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

What model of Cub are your working on? The #26 model of Carb was used on many different models of tractors and had some variations.
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #3  
Old 11-30-2010, 07:04 AM
JaysNJcub127's Avatar
JaysNJcub127 JaysNJcub127 is offline
Senior Member
 
Join Date: Jun 2010
Location: New Jersey
Posts: 471
Default 105

This carb is off a 105. I see one company sells it as a blank and has no holes in it. Mine has six holes in it.
Reply With Quote
  #4  
Old 11-30-2010, 07:45 AM
JaysNJcub127's Avatar
JaysNJcub127 JaysNJcub127 is offline
Senior Member
 
Join Date: Jun 2010
Location: New Jersey
Posts: 471
Default the part

this is the part i need, but this one is a blank with no holes in it. I need the one with the 6 holes like came out of mine. I do NOT have the ability to drill them myself.



http://ccspecialties.org/carbjet.jpg
Reply With Quote
  #5  
Old 11-30-2010, 12:55 PM
B-Brush B-Brush is offline
Member
 
Join Date: Aug 2010
Location: Michigan
Posts: 35
Default

this is a tricky question from what i have found out i guess your not suppose to remove these . I even had a guy tell me that he went to kohler school and was told there to not remove them because one of the sets of holes were drilled while in the carb ??? i ended up buying a fuel inlet and new needle from brian millers site http://************************.com/a1carb.htm At the time it was all i could find. I have built the carb but have not put it to use yet . The holes were not the same as the old inlet but he said with the new needle it was sure to work .
There may well be sponsors here or on another site that sell them also just at the time i was unaware of them .
hope this helps
Reply With Quote
  #6  
Old 11-30-2010, 11:40 PM
JaysNJcub127's Avatar
JaysNJcub127 JaysNJcub127 is offline
Senior Member
 
Join Date: Jun 2010
Location: New Jersey
Posts: 471
Default spoke

Quote:
Originally Posted by B-Brush View Post
this is a tricky question from what i have found out i guess your not suppose to remove these . I even had a guy tell me that he went to kohler school and was told there to not remove them because one of the sets of holes were drilled while in the carb ??? i ended up buying a fuel inlet and new needle from brian millers site http://************************.com/a1carb.htm At the time it was all i could find. I have built the carb but have not put it to use yet . The holes were not the same as the old inlet but he said with the new needle it was sure to work .
There may well be sponsors here or on another site that sell them also just at the time i was unaware of them .
hope this helps
I spoke to Brian Miller today and he said that it is a direct replacement. The way its drilled works better with todays gas. he said just screw it in all the way and your all set. I am gonna give it a try !!!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.