Cub Cadet 2084

[Ewilliams]

Hello everyone. Going to pick up a 2084 tomorrow. Everything seems good. Has a 3 point hitch and rear pto. It looks like a kohler m20 motor from the picture. Didn't these come with a ch20 motor?

Thanks,
Earl

[Eslenk]

yes, at least mine did.

[J-Mech]

Yes, they did. That one has been repowered. Looks like it came from a early cyclops though, by the heat shield.

[Dirty Steve]

Saw that on Craigslist. Good deal especially with three point. Hope it serves you well.

[Ewilliams]

It thought it probably was repowered. That's okay because I like the magnum motors.

Thanks,
Earl

[aagitch]

Could it actually be a 2082? Although you'd think the po knows what he has.

[Sam Mac]

2082's had Mag 20's, 2084's had CH20's. My bet is that is a 2082.

[Oak]

let's see the serial tag and we will know what it is.

[Ewilliams]

Well went and picked it up yesterday. I am really baffled. When I took off the side cover this is what I found. The air cleaner say M20 and the tin says M18. Also there is no oil filter. The cover where the lines come out of the motor is a solid cover with no fittings. I am not even sure if this is a 2084. The decal 2084 is not in the right spot from what I see on other 2084's. I am really not sure how to read the model number on the serial tag. The tractor runs decent, and everything works, but I think I should have taken a better look. Any help in figuring this out would greatly be appreciated. I am feeling like why did I get myself into this one.
Thanks,
Earl

[Dirty Steve]

A 2082 would have a model numbers 140-731-100, 141-731-100, 142-732-100. At least that is what Google said. All depends on the serial number which one it is. The Cub Cadet site will have the serial number breakdowns.