PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Considering diy spring assist
I'm thinking about making my own spring assist for my 127. It looks pretty straight forward and I don't have the flow to blow right now. I figure I'd need an appropriate spring, weld a 1/2-13 nut to the end, get some 1/2" rod stock and bend it, fab up the brackets/u-by assembly. Some info that might help would be the length of the spring (coiled part only) and diameter, diameter of spring wire, length of the rod (measured along the bends, not just end to end), distance of bends relative to ends of rod. Also do the bends all lie within the same plane or are they out of plane? Thanks. Also, pics with ruler for reference would be great.
|
#2
|
|||
|
|||
I don't know about welding a spring anytime we heated a spring to get the bolt out it wrecked the spring it unsprung its self
|
#3
|
|||
|
|||
Isn't there a welded-in nut in the oem spring?
|
#4
|
|||
|
|||
If the welded-in nut isn't an option, I'd consider trying a yoke-end and a spring with loops on both ends.
|
#5
|
||||
|
||||
They weld on the nut before heat treat, difficult to duplicate at home!!
|
#6
|
||||
|
||||
Here is what Ariens does, a chain in a tear-drop shaped hole.
Simply pull to the next link for more force. I like the "T" shaped handle at the end of the chain!! The warning below it tells you to only pull on the handle, so the chain and spring does not pull your hand through the hole!! |
#7
|
|||
|
|||
I love the "here's ur sign" warnings!
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.