|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
11-18-2018, 10:13 AM
|
||||
|
||||
Engine fan screen removal on 105.
The motor cooling fan screen has gotten loose. Any tips before I get into this? Not looking forward to removing the cooling fan nut.
|
|
#2
11-18-2018, 07:31 PM
|
||||
|
||||
|
That screen is mounted to the drive hub with 4 screws. Chances are that the screen has broken around the screen hole that allows for the screw to pass through, into the drive hub. Maybe adding a washer to the screw to secure a larger area of the screen. Maybe the screws just need tightened back up. I'm not sure the at the moment, how much meat is on the drive hub to consider a larger hole being tapped if the hole for the screen in the drive hub is stripped out.
__________________
IH CUB CADET 1450, 72, 86, 1211, IH #2 CART, IH 56" SNOW BLADE, COLLECTING CUB CADET ENGINES
|
|
#3
11-18-2018, 07:37 PM
|
||||
|
||||
|
You will have to remove the engine.
Then you have to remove the drive coupler, then the nut holding the drive cup on. Or you can just remove the screen on the tractor with a pair of tin snippys and call it a day...
__________________
Up to 530 and counting... I give up updating my profile!
|
|
#4
11-18-2018, 07:39 PM
|
||||
|
||||
|
Quote:
__________________
IH CUB CADET 1450, 72, 86, 1211, IH #2 CART, IH 56" SNOW BLADE, COLLECTING CUB CADET ENGINES
|
|
#5
11-18-2018, 07:55 PM
|
||||
|
||||
|
yes the three pin driver on the brain, that gives you more room for the tin snippys heheheheh
__________________
Up to 530 and counting... I give up updating my profile!
|
|
#6
11-18-2018, 08:02 PM
|
||||
|
||||
|
It would be a good time to check out that drive flange too, prolly replace the hardened retaining pin as well. I know JeffinPa has the drive flanges. I don't think I'd want to run the 105 with out the flywheel screen, though.
__________________
IH CUB CADET 1450, 72, 86, 1211, IH #2 CART, IH 56" SNOW BLADE, COLLECTING CUB CADET ENGINES
|
|
#7
11-19-2018, 08:09 AM
|
||||
|
||||
|
105 engine fan screen
Thanks for the responses ! Snippy time. The screen is a mess, more snow tomorrow, thrower is mounted, new screen is ordered ( Hurley-$65 shipped), and I’m not interested in pulling the motor untill spring. The Cub’s primary duty is snow removal with a little hauling arount the property—no mowing. My biggest concern with no screen is mice getting into the motor shrouds, but I have found cayenne pepper powder is a splended treat for rodents, just have to re-treat after the tractor is run. Drive line parts are all new front to back, and thanks to Jeff and his advice to check the ENTIRE drive line a disater was avoided. Just hope this works out untill Spring.
|
|
#8
11-19-2018, 08:22 AM
|
||||
|
||||
|
The screen does not stop mice, they come in from the fin area.
If the equipment is used frequently, like mowing or snow duty, they don't have much of a chance building a reproduction home. If you are paranoid of the little cuddly creatures, a pair of snap traps baited with peanut butter in close proximity, will keep things in check. (Hint: they crawl up the tires) The rotating screen helps keep grass, leaves and other debris from packing the cooling areas. Happy trapping. 
|
|
#9
11-19-2018, 09:26 AM
|
||||
|
||||
|
105 fan scren
I agree, but isn’t the fan also an easy way in when the screen is not there?
|
|
#10
11-19-2018, 09:31 AM
|
||||
|
||||
|
105 fan screen
Also I expect to replace the head gasket this spring, and will pull the shrouds to do any necessary clean up of the fins.
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
