|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
04-29-2021, 02:58 PM
|
|||
|
|||
New Member, Old Tractors
A word of thanks to all the subject matter experts.
A few months ago I came into possession of a couple Cub Cadets, a 149 and a 782. They're barn finds from an old church friend who acquired them from his son. He didn't any of the histories but offered them to me. I've found all my service questions can be found previously posted on the OCC site. The 782 wouldn't hold rear end hydro fluid. I filled it long enough to make sure the pump/transmission was good before disassembly. I found out that the 5/16x18 threaded cast molding for the bottom right corner on the rear casting was broken off. I broke the tractor in half and took the rear to a local machine shop and had them build up the metal and have it rethreaded ($125.00). I'm in process of collecting the remaining gaskets/seals for reassembly, parts should be here over the weekend. The next trouble I found was the M18 would run although it was only running on one cylinder. Removing the head I discovered someone had dropped a screw in the carb and it was stuck seated under the intake valve. After removing the valve the seat had moderately bad scarring. I polished/lapped it the best I could. It's much better but if I get all the bugs out of the tractor it'll probably need replacing. The 149 didn't have any fire and I found out it had a bad coil. Got it running and discovered the manual PTO wouldn't engage. After drilling out set screws and disassembling the clutch it didn't have any friction plate at all. I've got all the necessary rebuild parts on order including those pointed set screws.. I haven't had a chance to look at the deck assemblies but they're next on list. Slowly but surly I'm getting to the point where I'll have these old girls running again. My main reason for posting again is to thanks all those before me that took time to document their processes. It's invaluable to have. I'm not much at video's or pictures but will try to post some updates after they're new and shiny again. 
|
|
#2
04-29-2021, 04:43 PM
|
|||
|
|||
|
Welcome to OCC.........
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|
|
#3
04-29-2021, 11:12 PM
|
||||
|
||||
|
Welcome to OCC!
__________________
125, 126, 147, 129, 149 x 2, 1450, 882, 1810, 1320, 1440, 2135, 2 129’s for parts/project, 1950 Farmall Cub 38" LT mower deck, 4 42" triangle mower decks, 2 44A mower decks, 2 50C mower decks, 42” GT deck, 3 42" snow/dirt blades, 42" landscape rake, #4 cart      
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
