PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Tri fold Disc
As some of you know I was talking about making a 4 bottom plow. I was also wondering if anybody has seen a tri-fold disc that would cover about 10 feet in a pass. I think you would need or want at least 3 hydraulic spools for folding and for wheels. What are some of your thoughts on this.
__________________
1862, 400 tiller, brinly 10'' plow 1282 |
#2
|
||||
|
||||
Good luck pulling a 10 ft disc with a Cub. My dad has a 20 or 22 ft disc and uses a 180 horse IH 1586 to pull it. If it's just for show and you don't plan on actually putting it in the ground then have at it. It would look cool at shows.
__________________
Adam 1964 Model 100 w/ K301 12hp and custom hydraulics 1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone |
#3
|
||||
|
||||
My 782 easily pulls a 12'6" tandem disk,------------------------
of course it is on level grass and the disk blades are suspended in the air by the transport wheels. When it is in a field, it needs my 100 Hp 806 to effectively pull it, fitting cropland. |
#4
|
|||
|
|||
Cubs are tough...but not that tough... You are overestimating the capabilities of a garden tractor.
__________________
Cubs: 2072 w/60" Haban, 782 w/Johnson 14 loader & 44" deck, & 169. Others: Ford 120, Ford LGT100, Ford LGT125, 2 - Ford LGT145s, & 4 - John Deere 140, H1 and H3. |
#5
|
||||
|
||||
Something like this? Looks neat, but your going to have more disc than tractor. It looks cool though! You might get away with 6ft long as you don't run very deep.
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! |
#6
|
|||
|
|||
Yeah..... I'm not getting in on this one. I debated enough in the 4 bottom plow thread. Have-at bud.
|
#7
|
|||
|
|||
bocephus that is what I mean right there. Shaner I plan on building a cub just for this odd ball stuff. The final design is still up in the air but it will be on of the two pictures below. Sorry now about not being the right colors.
__________________
1862, 400 tiller, brinly 10'' plow 1282 |
#8
|
|||
|
|||
I won't comment on the feasibility of the project (I have plenty of those kind of ideas myself).
On the hydraulics requirements, you should be able to get by with two spools, One for lifting the transport wheels and one for folding the wings, unless you want to be able to run it with only one wing down, then you would need three spools. |
#9
|
||||
|
||||
Impossible.
__________________
I lost track of what I own a long time ago! |
#10
|
||||
|
||||
Dont waste your time. ..
Build a 4 bottom roll over plow instead, then build a discovator. Tandem disks are a dime a dozen If you built those two things THAT would b cool! Then it would be cool to see what you would pull it with... Make it look good, now get after it! |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.