Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 07-28-2016, 10:12 PM
Bsmith Bsmith is offline
Senior Member
 
Join Date: May 2011
Location: PA
Posts: 196
Default New to me....3225 FEL!!!

Well I've gone and joined two new clubs. The 3000 series club and the FEL club.

I have been searching for a loader for about the last six months. I want one to help help with landscaping the property that my wife and I are building a new home on.

So I found this. 3225 with a Kwik-Way loader. The tractor has 560 hours on it. It runs nice and the loader works smoothly and quickly. It has some missing powder coat and some surface rust of the foot rest pan but seems to be mechanically sound with one exception.

The steering is horrible. Probably the worst case of wander I have experienced on a power steering tractor. We have a local hydro shop here that has rebuilt some power steering cylinders for us in the past with good results so this cylinder will be headed their way ASAP.

I have a lot to learn about this series of tractors and the loader as both are a first for me but I am looking forward to it. I need to get some manuals and start studying.

I did add a little old IH to it today by adding a set of wheel weights that I had lying around.

Here are the pics.
Attached Images
File Type: jpg image.jpg (40.0 KB, 254 views)
Reply With Quote
  #2  
Old 07-28-2016, 10:14 PM
Bsmith Bsmith is offline
Senior Member
 
Join Date: May 2011
Location: PA
Posts: 196
Default

Picture two
Attached Images
File Type: jpg image.jpg (39.7 KB, 250 views)
Reply With Quote
  #3  
Old 07-28-2016, 10:15 PM
Bsmith Bsmith is offline
Senior Member
 
Join Date: May 2011
Location: PA
Posts: 196
Default

Picture three
Attached Images
File Type: jpg image.jpg (36.9 KB, 254 views)
Reply With Quote
  #4  
Old 07-28-2016, 10:17 PM
Bsmith Bsmith is offline
Senior Member
 
Join Date: May 2011
Location: PA
Posts: 196
Default

Picture four
Attached Images
File Type: jpg image.jpg (46.5 KB, 251 views)
Reply With Quote
  #5  
Old 07-28-2016, 10:18 PM
Bsmith Bsmith is offline
Senior Member
 
Join Date: May 2011
Location: PA
Posts: 196
Default

Picture five
Attached Images
File Type: jpg image.jpg (41.8 KB, 255 views)
Reply With Quote
  #6  
Old 07-28-2016, 10:20 PM
Bsmith Bsmith is offline
Senior Member
 
Join Date: May 2011
Location: PA
Posts: 196
Default

Picture six
Attached Images
File Type: jpg image.jpg (31.8 KB, 254 views)
Reply With Quote
  #7  
Old 07-28-2016, 10:33 PM
Dirty Steve's Avatar
Dirty Steve Dirty Steve is offline
Grand Member
 
Join Date: May 2011
Location: NY
Posts: 1,821
Default

Congrats!! Nice looking rig you picked up and a hell of a nice heard you have!!!
__________________
http://www.onlycubcadets.net/forum/s...ad.php?t=42646

70, #1 cart. Brinly Cultivator. Some wheel weights.

{125, 126, 2072-Sold~regrettably, 2284 60 inch Haban 325 deck., 451 snowblower, 2182-60 inch Haban 374 deck- "Money Pit", 401 Haban 54 inch dozer blade- rebuilt, 1440-down the road, Another 2182 for parts. Another 2284 for parts. 450 blower. 1812-sold, 2072 w/ Haban 374, and a 2182#3 w/ Haban 325}-------> All SOLD
Reply With Quote
  #8  
Old 07-28-2016, 10:37 PM
Rescue11's Avatar
Rescue11 Rescue11 is offline
Grand Member
 
Join Date: Apr 2011
Location: Nebraska
Posts: 1,490
Default

Your steering, front axle bushings, pins, spindles, bearings, ball joints... basically anything on that front end will wear out in a hurry with a fel. Not saying loaders are bad, but cub cadet gts and sgt were not built for front loaders. Notice the lack of oem cub cadet brand loaders for gts?

Simply put, your loader will punish that garden tractor same as if you dropped it from a 3 story building on to cured pavement. Good luck, nice looking machine, first i have seen a 3k machine with a loader!
__________________
1- 1864 Dual hyd, cat 0, axle braces
1- 1450 Dual Stick w/ power steering
1- 1200 in pieces
1- 1864 in pieces
QA36A Thrower, #1 Tiller w/ extensions, IH windbreaker, IH wheel weights, 44C mower deck, 50C mower deck, CCC 54" Blade, GT46 high vacuum deck, GT54 deck, Cub Tripple Bagger, Custom dozer blade, Custom suitcase weights, 3pt cultivator, lawn sweeper, original R-Bucket
Reply With Quote
  #9  
Old 07-28-2016, 10:49 PM
J-Mech J-Mech is offline
Banned
 
Join Date: Apr 2013
Location: Oblong, Illinois
Posts: 17,594
Default

^^^^ X2

It's not likely the steering cylinder is bad. It's likely that the front end is already shot.
Reply With Quote
  #10  
Old 07-29-2016, 09:41 AM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

My only issue with FEL's on Cubs is the size of the buckets. OK if your using it to clean out stalls in a horse barn or a little mulch but WAY to big for dirt work.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.