PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
My Equipment Shed Build
According to city hall regulations for the zone I live in the maximum size shed allowed with out a foundation is 400 sq. ft., and the maximum height is 15' so that's what I went with. Started the prepping for the area in Oct. and minus the siding had it all buttoned up before the first snow. Siding will be done in the spring. I built the shed for storing my skid steer and acquired cubs and do do maintenance on them, yet if I had the need to I wanted it big enough for a full size truck / car to pull in. Dimensions on the left section are 12' x 24' and on the right side 8' x 14'.
Well I'll post some pictures over the next few days of the progress as it went along. Pictures L to R. #1 Outline and area of proposed shed. #2 3/8" bedding stone for pad and pressure treated deck lumber. #3 Leveled, compacted pad about 2' bigger all the way around. #4 Outer perimeter frame using 6"x6" with a 2x8 on bottom for ledger. #5 Deck framed out 12" o.c. with all 2"x6" pressure treated. The section to the right has a sleeper so the largest span for joists was about 4.5'.
__________________
Thanks, Joe Presently have : 100 1200 1250 |
#2
|
||||
|
||||
IMG_1498.jpg Deck framed ready for sheathing.
IMG_1500.jpg Sheathed using 3/4" pressure treated plywood. IMG_1505.jpg Jig built on deck to assemble roof trusses. IMG_1506.jpg 12' trusses for forward section of shed. IMG_1507.jpg 20' trusses for rear section of shed. Pitch used was 6.75" to max out the height allowed. The roof pitch on house is 9" and would have liked to match that, but close enough.
__________________
Thanks, Joe Presently have : 100 1200 1250 |
#3
|
||||
|
||||
IMG_1513.jpg Rear 20' gable end all studded up.
IMG_1514.jpg Gable end sheathed. IMG_1517.jpg Gable end with barge rafters on and wrapped with wall jacks in place. IMG_1518.jpg Gable end about 3/4's of the way lifted. IMG_1519.jpg Gable end raised and braces nailed in place.
__________________
Thanks, Joe Presently have : 100 1200 1250 |
#4
|
|||
|
|||
Wow..... for the money you have in the floor, you could have put it on a foundation, filled it with gravel and poured concrete when you had the money.
I think after a couple years when it settles, your not going to like the sagging walls and roof. Just like the saying goes, if you build on a strong foundation...... Sorry, it looks nice, but I think you made big mistake. |
#5
|
||||
|
||||
JoeMopar
Nice work on the equipment shed. Going to be a lot of nice storage space |
#6
|
||||
|
||||
Quote:
Also, Coons, Woodchucks, Rats, Squirrels and other critters love to make homes under things like that. When I was young and dumb, I put up a little metal storage shed that was given to me by a friend. I built a platform made out of treated wood to set it on. It turned ugly under there after a few years, with critters. Finally I just scrapped it. We all have to learn, I wish him the best of luck, it is a nice looking building! May I suggest that you never lean or pile anything around the perimeter that will entice a shelter for critters, they love feeling secure while digging. |
#7
|
||||
|
||||
Quote:
Believe me I gave it lot's of thought. I've been in construction over 40 years, not my first rodeo as they would say. I placed 12" of 3/8" stone compacted in ( 3 ) 8" lifts, the whole structure has a wide 7.5" bearing where ever you see the 6x6's. The perimeter is totally closed off and back filled with the stone and some top soil as you will see in coming pictures. You have to remember it's a SHED. lol Well hopefully I made the right decision for myself after thinking it out and trying to watch the dollars for basically a big toy box. At this point without the siding I'm into it for around 5K. Hope this explains why I went this route.
__________________
Thanks, Joe Presently have : 100 1200 1250 |
#8
|
||||
|
||||
Quote:
__________________
Thanks, Joe Presently have : 100 1200 1250 |
#9
|
||||
|
||||
IMG_1520.jpg Front Gable with opening for the roll up door.
IMG_1522.jpg Starting to take on a 3rd. dimension. IMG_1523.jpg Had a retired buddy stop by to help put the trusses up IMG_1693.JPG Nice and low enough to use skid steer for shingles. IMG_1531.jpg Lucked out and had enough roof shingles left over from a job.
__________________
Thanks, Joe Presently have : 100 1200 1250 |
#10
|
||||
|
||||
Looks good to me. I'm sure it will give you many years of service.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.