PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
1864 Resto-Fication
After many threats, the 1864 is finally getting re done. Nightow1 got the basics torn down and cleaned with my Hotsy. To start, we are going to pull the axle tubes and drill the drain holes and replace the seals and gaskets.
I have been buying parts for the last couple years in anticipation of this. Tonight i purchased the 3point plate from xmw. Kinda excited! Got a decent little list started.... should be interesting |
#2
|
|||
|
|||
I can't wait!!!!
|
#3
|
|||
|
|||
Ditto!!!!
__________________
Keep dragg'n em in. They're like orphans...they all need a place to call home. |
#4
|
||||
|
||||
Welp i just spent some more money...
I ordered the paint, new hydro springs, spacers, and rear end gaskets from r.f. houtz. At this point i need to get the frame prepped for paint, do the rear end drain mod, install new gaskets in the rear end, and replace the hydro springs. Once the paint shows up i can begin painting the frame and rear end. Once this part is completed i get to start on the threepoint and hydraulics! I did measure the 3pt arms on my 982 and found they are only 2" longer than the gt ones. I don't like how the gt arms can rub on the tires if they are set in the lowest forward most hole. (Keeping the very end of the arms closesed to the tractor as possible) Dont like stabilizer chaines either. SO my plan is to build duplicate sgt arms that are shorter in length, then build the sway blocks that mount to the actual plate. This will keep the arms close to the plate, away from the tires while allowing me to have the 20" spread that is the industry standard! No pix but hopefully soon |
#5
|
|||
|
|||
Do you have any plans of putting hydraulic front ports on your tractor while it apart? They're pretty nice to have just in case you ever need them. Being as your spending more $$$$$$!!! Sorry! lol
Looks like your going to have yourself a real workhorse of a machine when your finished with this project.
__________________
Keep dragg'n em in. They're like orphans...they all need a place to call home. |
#6
|
||||
|
||||
Quote:
Plan to build a hydraulic top link like the new magnums come out with, then build a quick-tach. Getting ahead of myself lol it should b fun |
#7
|
||||
|
||||
Well my order from xmw arrived today... not gunna lie, i was excited! Waiting on my other order to show up from another place that lost my list...
Anyway, im kinda at a stand still until the paint shows up, but it gives me more time to think about other things i might do to it. I have been looking for a hydraulic cylinder for the rear end. |
#8
|
||||
|
||||
Keith and I now have the rear end cleaned, drain holes drilled, new gaskets and seals installed, new filter installed, new hydro springs and spacers installed, and a fresh coat of black paint on it
Keith painted the gt axle braces and installed them. I re c ieved my rf houtz order last week, included is the paint. Going to do a little research on prepping the frame for paint so we can get to my favorite part... hydraulics Heres pix of the rear end during the drain mod. It was very clean when we pulled it apart! --Anyone kno where to get a new or reproduction wiring harness for an 1864? |
#9
|
||||
|
||||
You guys are having way too much fun. Nice work on the axle drains.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#10
|
||||
|
||||
Finally starting work on this thing again. Got a guy that has it in his shop prepping it for paint. Hopefully the yellow stuff will be out from paint n a few weeks or so.
Still have to visit O'Reillys to get my paint matched for the plastic. Took a few pix of decals Maple Hunter doesnt have for the 1864, so hopefully they turn out good enough that they can recreate them to offer the public. I plan to start building my Unlimited cat 0 3pt after the frame is assembled on the rear end.
__________________
1- 1864 Dual hyd, cat 0, axle braces 1- 1450 Dual Stick w/ power steering 1- 1200 in pieces 1- 1864 in pieces QA36A Thrower, #1 Tiller w/ extensions, IH windbreaker, IH wheel weights, 44C mower deck, 50C mower deck, CCC 54" Blade, GT46 high vacuum deck, GT54 deck, Cub Tripple Bagger, Custom dozer blade, Custom suitcase weights, 3pt cultivator, lawn sweeper, original R-Bucket |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.