|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
12-30-2020, 08:00 PM
|
|||
|
|||
Plow lift handle bracket question
Hi All, got the plow on tonight but the lift handle bracket doesnt allow the foot pedal to go back against the frame. Looks like it might be bent up too much? I still framed some plow videos to try and get a close up but no luck. I can just heat and bend the fingers out but just in case I am missing something, throwing it up here first:
__________________
Model 100 Dec 2020 - Running condition, has snow plow! Model 123 Nov 2020 Hydro needs much work, or resto, building front end loader for this one Model 100 Feb 2019 apart for total frame-off / sandblast etc resto Model 70 Sep 2020 needs total resto and an engine, or for parts Model 70/100 Mar 2021 buried in rust, frozen engine, got free for parts. two spare hydro rears "in for a penny, in for a pound!" 
|
|
#2
12-30-2020, 08:11 PM
|
||||
|
||||
|
That one is for the 1x6 1x7 models, it will still work but you will need a longer bolt and some washers to space the the foot rest away from the frame.
__________________
Up to 530 and counting... I give up updating my profile!
|
|
#3
12-30-2020, 08:14 PM
|
|||
|
|||
|
Quote:
cool that explains it then! I can always bend those tabs away too I would think so the foot rest can then move inward where it belongs...
__________________
Model 100 Dec 2020 - Running condition, has snow plow! Model 123 Nov 2020 Hydro needs much work, or resto, building front end loader for this one Model 100 Feb 2019 apart for total frame-off / sandblast etc resto Model 70 Sep 2020 needs total resto and an engine, or for parts Model 70/100 Mar 2021 buried in rust, frozen engine, got free for parts. two spare hydro rears "in for a penny, in for a pound!"
|
|
#4
12-30-2020, 08:19 PM
|
||||
|
||||
|
The tabs are supposed to be there, a bolt goes through the bracket to keep it from coming off.
__________________
Up to 530 and counting... I give up updating my profile!
|
|
#6
12-30-2020, 08:52 PM
|
||||
|
||||
|
What is he going to do when the forks for the plow frame are there?
There is a manual that shows how it mounts.
__________________
Up to 530 and counting... I give up updating my profile!
|
|
#7
12-30-2020, 10:28 PM
|
|||
|
|||
|
Quote:
__________________
Model 100 Dec 2020 - Running condition, has snow plow! Model 123 Nov 2020 Hydro needs much work, or resto, building front end loader for this one Model 100 Feb 2019 apart for total frame-off / sandblast etc resto Model 70 Sep 2020 needs total resto and an engine, or for parts Model 70/100 Mar 2021 buried in rust, frozen engine, got free for parts. two spare hydro rears "in for a penny, in for a pound!"
|
|
#8
12-30-2020, 10:46 PM
|
||||
|
||||
|
They mount on the outside of the frame.
__________________
Up to 530 and counting... I give up updating my profile!
|
|
#9
12-30-2020, 11:47 PM
|
|||
|
|||
|
This is where they landed on the foot rest thru-rod...
the manual picture is not particularly clear. EDIT: I discovered a reason to move the forks outward. The pins on that bracket assembly (mower bracket?) come up and hit the form arms now when the lift lever is pulled back. If the fork arms were spread out more the pins would pass them. I will do that tomorrow.
__________________
Model 100 Dec 2020 - Running condition, has snow plow! Model 123 Nov 2020 Hydro needs much work, or resto, building front end loader for this one Model 100 Feb 2019 apart for total frame-off / sandblast etc resto Model 70 Sep 2020 needs total resto and an engine, or for parts Model 70/100 Mar 2021 buried in rust, frozen engine, got free for parts. two spare hydro rears "in for a penny, in for a pound!"
|
|
#10
12-31-2020, 04:05 PM
|
||||
|
||||
|
I'd take the lift bracket off and smash the tabs on the bottom together in a vise. to facilitate the footrest being reinstalled.
The sub frame arms need to attach to the outside of the frame on the rockshaft, not inside as pictured above. The manual has it on the outside of the frame. It's a PITA to get it all lined up- I have a block of wood the correct length I stick in the subframe to spread the arms to get it to clear the A brackets that the shaft bolt to the (tractor) frame.
__________________
Daniel G.  . (May 1970) 147 w/an IH spring assist, 48" deck, 42" blade, 1969 73, #2 trailer, 10" Brinly plow and (on loan) Dad's #2 tiller.
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
