PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
147 hydraulic lift?
I was thinking about investing some money into a hydrulic lift for my 147 which i use for snow blowing and tilling and im not the strongest person ever so this will be a huge help but was just wonder what they look like and were i can buy one and i was also thinking of restoring it and if i do i will fully deck it out thank you all for answering my seemingly stupid questions
-zach |
#2
|
|||
|
|||
There were two options for a lift. One was Electric and the other was an Auxiliary Hydro Unit as seen in this image.....
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1: |
#3
|
|||
|
|||
I put a hydro unit on my 147 and It's not a mere bolt on. The driveshaft needs to be shortened and another pulley needs to be added to the rear of the engine because the one that's on the 14 horse does'nt stick out far enough to get a belt on. The hydro unit needs to be moved back to line up to the new pulley and the frame needs to be drilled for the support bracket. Moving the hydro unit back also causes some clearance problems with the rockshaft. When it's in full up position the rockshaft will hit the back of the slot on the tractor body causing the cylinder shaft to bend. I did'nt want to cut the body out so, I had to modify the rockshaft. It works great but, if you don't have a welder, a way to cut steel, and patience, forget it.
|
#4
|
||||
|
||||
so is an eletric lift any better
|
#5
|
||||
|
||||
If you can find one, till the 75.00 spyroid gear shells out. Imho they r slow. Would b worth the trouble for hyd lift
__________________
1- 1864 Dual hyd, cat 0, axle braces 1- 1450 Dual Stick w/ power steering 1- 1200 in pieces 1- 1864 in pieces QA36A Thrower, #1 Tiller w/ extensions, IH windbreaker, IH wheel weights, 44C mower deck, 50C mower deck, CCC 54" Blade, GT46 high vacuum deck, GT54 deck, Cub Tripple Bagger, Custom dozer blade, Custom suitcase weights, 3pt cultivator, lawn sweeper, original R-Bucket |
#6
|
||||
|
||||
For me, a manual lift rod + spring assist is the best option. The e-lift is too troublesome and installing a hydraulic lift is a PITA because it's not a bolt-on like other N/F tractors. I also toyed with the idea of a hydraulic lift but the cons outweighed the pros.
__________________
Daniel G. . (May 1970) 147 w/an IH spring assist, 48" deck, 42" blade, 1969 73, #2 trailer, 10" Brinly plow and (on loan) Dad's #2 tiller. |
#7
|
||||
|
||||
Most of the time I see electric lifts on the 147, but a spring assist is an economical alternative. It kind of depends on your snow blower---is it 36" or 42". Have you consider a blade for the front? I have great luck moving snow with blades, they are about 94 lbs. and with a spring assist, they feel like they weigh about 30 lbs.....
Don't be fooled by Roland's picture....the hydraulic lifts are never that immaculate unless he owns them!!! (hahaha) Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. |
#8
|
||||
|
||||
well dont you have to take off the whole fender thing to get at where it hooks to drglinski
|
#9
|
||||
|
||||
and so what you guys are getting at is a spong assist is a btter option and its a 42 inch blower and would you guys happen to have any pics of one set up
|
#10
|
||||
|
||||
Quote:
Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.