Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Engines

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 07-05-2020, 04:42 PM
rsshallop rsshallop is offline
Senior Member
 
Join Date: Oct 2018
Location: Minden, Ontario
Posts: 144
Default Spark plug problem

Has anyone ever heard of spark plugs consistently going bad after about one hour of run time? I have experienced this about three or four times in a row where I install a new spark plug (gaped to .035) on my newly rebuild k241a, run the engine, turn it off, come back to start it only to find that the plug will no longer spark. I thought that I may have been cracking the insulator while I am putting them in, although I am very careful doing it, torquing them in stages to 20 foot pounds. I have inspected them all and no cracks are visible on the insulator portion. One thing I do notice in a big way is the shock from the plug when I crank the engine and the plug not grounded. When I do that, a spark will come off the metal shell of the plug to the engine block, instead of between the electrodes.
Reply With Quote
  #2  
Old 07-05-2020, 05:50 PM
R Bedell R Bedell is offline
Inactive Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

What plug are you using ??
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #3  
Old 07-05-2020, 06:05 PM
rsshallop rsshallop is offline
Senior Member
 
Join Date: Oct 2018
Location: Minden, Ontario
Posts: 144
Default

So far, Ive gone through three Champion H10C plugs and one NGK B-6L
Reply With Quote
  #4  
Old 07-05-2020, 07:03 PM
R Bedell R Bedell is offline
Inactive Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

I have used Autolites #216 for years and NEVER had an issue.

See link: Spark Plug Chart
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #5  
Old 07-05-2020, 07:22 PM
rsshallop rsshallop is offline
Senior Member
 
Join Date: Oct 2018
Location: Minden, Ontario
Posts: 144
Default

I'll try the Autolite #216, but it would be good if I knew why the plugs are going bad. Unless I'm mistaken, the Champion H10C are a recommended plug for this engine. The issue with the plugs loosing the arc between the electrodes after very little use is screwy. I'm pretty sure something related to the ignition system must be causing this. Four factory defective plugs in a row is highly unlikely.
Reply With Quote
  #6  
Old 07-05-2020, 08:04 PM
R Bedell R Bedell is offline
Inactive Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

What Ignition Coil are you running on this engine ...??

__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #7  
Old 07-05-2020, 09:00 PM
rsshallop rsshallop is offline
Senior Member
 
Join Date: Oct 2018
Location: Minden, Ontario
Posts: 144
Default

It's new. Probably made in china. I have the one that came with the 108 when I got it. I'm going to clean the ground from the negative post on the battery to the frame and also put the original coil back on. Then hopfully see better results.
Reply With Quote
  #8  
Old 07-05-2020, 10:43 PM
Merk Merk is offline
Grand Member
 
Join Date: Mar 2009
Location: Ohio
Posts: 2,182
Default

How old is spark plug wire?
How old is the gas?
What size carb are you running-26 or 30????
What does the spark plug electrode look like when it won't start?
Stock rebuild on engine?
New points and condenser?
__________________
Project Uncle Dick
Cub Cadet 70
http://www.onlycubcadets.net/forum/s...ght=Uncle+Dick
Reply With Quote
  #9  
Old 07-06-2020, 07:58 AM
R Bedell R Bedell is offline
Inactive Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

It sounds like you are using an aftermarket Ignition Coil. I would suggest that you use the coil, Kohler recommends.

__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #10  
Old 07-06-2020, 09:40 AM
rsshallop rsshallop is offline
Senior Member
 
Join Date: Oct 2018
Location: Minden, Ontario
Posts: 144
Default

Hello Merk,
This is how I am running the engine now:

1) Plug wire : original
2) Gasoline: about 4 months old. 91 octane without ethanol
3) Carb size: I believe it's a 26, I would have to check though.
4) Spark plug electrodes: sooty. I'm probably running it too rich.
5) Rebuild: stock
6) Points and Condenser: the condenser is new, but I'm going with the points that came with the tractor for now.

I have a multimeter , so I'm going to test both the new coil and old coil to see if there are any differences. I will also check the resistance of the plug wire. I will report back a little later today with my findings.

Hello Roland,
Yes, I agree. Always better to use original parts when possible.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:46 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.