Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Implements and Attachments

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 12-01-2014, 05:27 PM
LoneWolf LoneWolf is offline
New Member
 
Join Date: May 2011
Location: Colorado
Posts: 2
Default Lift Links for 450 Snowblower

I recently purchased a 450 snowblower to put on my 982. This blower was formerly on a GT so I added the bracket extension to carriage bracket and moved the pivot links to the appropriate holes. After mounting it on the tractor the blower won't lower far enough. After trying to adjust the lift arm, etc., I noticed that the lift links were fully extended and won't let the blower lower any more. After looking closer at the link arms it appears they have a splice in them which adapted them from some other application to work with this snowblower and a GT.

To make a long story short, does anybody have the lift link dimensions that will work with a 450 snowblower and a 982 SGT. I am looking for the overall length of the link as well as distance between holes and length of the slot if applicable. I am also not sure if there should be multiple holes on the opposite end from the slide or not.

Thanks in advance.
Reply With Quote
  #2  
Old 12-02-2014, 06:02 AM
sbauerz28's Avatar
sbauerz28 sbauerz28 is offline
Senior Member
 
Join Date: Jun 2013
Location: Owego NY
Posts: 355
Default

I just went through this. Put my 450 blower on my 1572 for the first time last month. The lift link length called out for the 448 snow thrower lift kit is 12.91. I think this is from center to center if you were to think of the slot as a single hole at the end of the slot.

I made my own with some 1/4" X 1.5" flat stock. I cut my old lift links in half and reused the end with the slot. Cut the flat stock and drill accordingly to the dimension above. I clamped both parts to some aluminum for welding to keep everything straight. The pic below shows the links before paint.

__________________
1450 w/ 44gt deck, 1572 w/ 50C deck, 450 snowblower.
Reply With Quote
  #3  
Old 12-02-2014, 02:19 PM
LoneWolf LoneWolf is offline
New Member
 
Join Date: May 2011
Location: Colorado
Posts: 2
Default

Sbauerz28,

Thanks for the information and the picture. This is exactly what I am looking for.
Reply With Quote
  #4  
Old 12-04-2014, 04:03 PM
Group_44's Avatar
Group_44 Group_44 is offline
Senior Member
 
Join Date: Sep 2014
Location: Morrisville, PA
Posts: 251
Default

If you haven't already done it , you may have to trim a couple of inches off the unused lever on the left side of the blower so it doesn't interfere with the chute rotation crank(notice the fresh cut rod in the attached picture). It will prevent the blower from going all the way down even with the correct links. Ask me how I know.
http://www.onlycubcadets.net/pdf/190...wner%20Man.pdf
Attached Images
File Type: jpg IMG_20141126_130446.jpg (34.9 KB, 120 views)
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.