Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 10-16-2023, 11:41 AM
weezykid weezykid is offline
New Member
 
Join Date: Aug 2020
Location: PA
Posts: 11
Default GT3200 wont turn off with new switch

My future father in law has a GT3200 that he loves and recently the key stopped working. I pulled the switch and opened it up to find some melted plastic and crud. Ordered a new Stens switch and it starts up fine, but will not shut off with the key now.

Was thinking the switch grounded the coil, but not finding a wire from the switch to the coil. Orange/white off "S" goes to the Brake switch which leads to an Orange/Black that leads to the PTO switch which leads to the orange/white to the solenoid.

He has mentioned some issues with the PTO switch not engaging as well intermittently so this all may be tying together now.

Thinking it may be a bad ignition switch I ordered a replacement. Any other ideas where to check? Hate to just start ordering a PTO switch as well as I don't want to just throw parts at it.

Need to see if I can follow the wiring along from the brake switch to the pto and then to the solenoid... Wanted to check with others.

Thanks!
Reply With Quote
  #2  
Old 10-16-2023, 12:59 PM
ironman's Avatar
ironman ironman is offline
Grand Member
 
Join Date: Sep 2012
Location: Pennsylvania
Posts: 2,288
Default

Assuming you have the correct switch, with the key in off position the magneto gets grounded thru contacts M and G.
Pull the plug off the switch and check to see if you have ground on the G contact of the plug.
You might first check the 25 amp fuse that appears to provide the ground connection to the switch and also the PTO.
Attached Images
File Type: jpg Screenshot 2023-10-16 113900.jpg (29.4 KB, 56 views)
File Type: jpg Screenshot 2023-10-16 114354.jpg (43.6 KB, 55 views)
Reply With Quote
  #3  
Old 10-16-2023, 01:26 PM
weezykid weezykid is offline
New Member
 
Join Date: Aug 2020
Location: PA
Posts: 11
Default

Thank you Ironman!!

Concentrating on the wiring too long I completely disregarded the key switch diagram at the bottom...

Going to test this switch to see if it connects the 3 listed.

Picked up a Stens Delta Ignition Switch 430-220 which crossed reference the same as the cub # and it has the same listed pinouts.
Reply With Quote
  #4  
Old 10-16-2023, 01:48 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,814
Default

This is the ignition switch that is called out on the Cub parts site for a GT3200

925-06119C
IGNITION MODULE SWITCH RMC (MAN PTO BLK)
This part replaces 725-04227.

Many times the "Will fit look a like's" are wired differently internally and they don't work.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #5  
Old 10-16-2023, 03:27 PM
weezykid weezykid is offline
New Member
 
Join Date: Aug 2020
Location: PA
Posts: 11
Default

I confirmed that the Stens switch is the same replacement..

https://www.stens.com/430-220-ignition-switch

Also confirmed that is is not a switch issue as they are all connected when the switch is in the off position.

So now for a lot of fun tracing wires.....
Reply With Quote
  #6  
Old 10-16-2023, 04:06 PM
ironman's Avatar
ironman ironman is offline
Grand Member
 
Join Date: Sep 2012
Location: Pennsylvania
Posts: 2,288
Default

Do you have a constant steady ground on the green wire of the plug that goes on the "G" terminal of the switch??
Attached Images
File Type: jpg Screenshot 2023-10-16 150458.jpg (11.1 KB, 52 views)
Reply With Quote
  #7  
Old 10-16-2023, 05:00 PM
weezykid weezykid is offline
New Member
 
Join Date: Aug 2020
Location: PA
Posts: 11
Default

Quote:
Originally Posted by ironman View Post
Do you have a constant steady ground on the green wire of the plug that goes on the "G" terminal of the switch??
Will check that first, unfortunately the tractor is not at my house.. Going to pick it up next time I am there so I can troubleshoot easier. Thank you both for all of your input so far.
Reply With Quote
  #8  
Old 10-17-2023, 10:23 AM
weezykid weezykid is offline
New Member
 
Join Date: Aug 2020
Location: PA
Posts: 11
Default

Confirmed that there is no ground at the green wire for the switch so I will pick it up this weekend and dig into it.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.