PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
creeper gear
Like to put a creeper gear on my 108 for tilling and snow thrower. My question is do you just cut the drive shaft down and reuse it? These are just a bolt on deal as far as i can tell. Any things to check when buying one? And do they interchange from NF to WF or are they a different unit? Going to post in wanted section thanks guys!
__________________
Sam My Cubs 108 & 1250 & 104 Tiller, snow thrower, Plow |
#2
|
||||
|
||||
Not real sure if they are suppost to interchange but I took one off a 102 and put it on a 1000 and it works fine. But as far as the driveshaft goes the hole should already be in it and there should be a score mark on where to cut it
__________________
1872 - 60"haban 54" power angle haban blade '63 Original - restoration project 582 -tiller 147 - leaf duty with bagger. 1811 - Ditch mower 800 - have it just cuz its a 800 |
#3
|
||||
|
||||
Yes, the creeper will fit the 70/100 series all the way up to the gear 82 series tractors. You would have to swap out the drive shaft coupling to the transmission if the creeper came off a narrow frame tractor. Also you would need to add a pipe extension to the vent on the creeper. Inspection is visual making sure gear teeth are not missing, cracks in any of the mount holes is a popular what to look for. You can operate the creeper by hand and see the under and regular drive working. Make sure the creeper comes with the input gear.
correct length cap screws, gasket, pin, and HY-Tran fluid will be needed. I'm getting ready to finally install my creeper to the 72. hope this has helped.
__________________
IH CUB CADET 1450, 72, 86, 1211, IH #2 CART, IH 56" SNOW BLADE, COLLECTING CUB CADET ENGINES |
#4
|
||||
|
||||
The nf and wf have a different bend on the handle and one from a nf will rub against the slot hole thingy on a wf.I guess you could use a flame wrench to bend it....but why not get the right one?
Under edit... I took some pictures to show the differences,NF on the left and WF on the right.The NF has a shorter handle and it does not not extend beyond the case as much as the Wf one has.Also the handles are bent slightly different on an angle.
__________________
Up to 530 and counting... I give up updating my profile! |
#5
|
|||
|
|||
Quote:
In my opinion it is a very lucky man who can just happen to have not one BUT two creeper gears just laying around waiting for a reason to take their pictures. Good job!
__________________
More IH Cub Cadet Parts RIGHT HERE |
#6
|
|||
|
|||
I have seen both ways nf in a wide frame and wf in a narrow frame and neither worked well both did not engage the whole way and under a hard load jumped out of gear just get the right one for your tractor on things to look for 1st spin it a round a few times to check the bearings 2nd looking from the back as you turn it there is 3 planet gears that run in a big gear make sure those are good 3rd on the shifter the roll pin thru the shift fork they tend to wear the hole in the shifter had one that the guy said was blown but the roll pin was wore and never went in to gear
|
#7
|
||||
|
||||
Thanks did know about about the handles or vent! Thanks for the pics that makes it so nice. Someone told me if they tend to pop out of gear the shift fork is bad? Not sure if there is any truth to that, but my father had a 73 that the trans did the same thing and the fork was bad on it. Ok got a hit in the wanted section crossing my fingers know these aren't easy to find. Thanks again guys.
__________________
Sam My Cubs 108 & 1250 & 104 Tiller, snow thrower, Plow |
#8
|
|||
|
|||
lews hoarding creepers too now, not only weights, i hoard carts
|
#9
|
||||
|
||||
Yes I am...I think I am hording headlights too....
__________________
Up to 530 and counting... I give up updating my profile! |
#10
|
|||
|
|||
lol how many sets
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.